JVC XL-R2010BK Disc Full, TNO Full, Cannot REC, Unlock, Scms Protect, Not Audio, Not REC Mute

Page 42

Message

Significance

Remedy

 

 

 

NO R/RW DISC

The disc inserted is a CD for computer data.

Check to see if the CD-ROM is recorded in

 

Recording and erase functions are not pos-

audio for mat. If not, replace with a disc

 

sible.

recorded using the CD-DA format.

 

 

 

DISC FULL

The CD-R or CD-RW has no available time.

Replace with another recordable CD-R or

 

 

CD-RW. Finalization of the disc is recom-

 

 

mended.

 

 

 

TNO FULL

99 tracks have been recorded on the disc.

Finalize the disc. Replace the disc to per-

 

Further recording is not possible.

form further recording.

 

 

 

CANNOT REC

Recording is not possible. This may be

Check connections and/or replace the disc.

 

caused by poor connections or disc trouble.

 

 

 

 

UNLOCK

When performing digital recording of an

Check the connection between the compo-

 

external component, the digital signal from

nent and this unit and confirm that the digi-

 

the component is not being sent or the sig-

tal signal being output from the component

 

nal being sent cannot be recorded by this

is compatible with this unit.

 

unit.

 

 

 

 

SCMS PROTECT

In accordance with SCMS regulations, digi-

Switch the source selection to select input

 

tal recording cannot be performed.

from the analog connections, and perform

 

 

analog recording.

 

 

 

NOT AUDIO IN

The digital signal is not an audio format.

Set the source component to output a digital

 

 

audio signal. For example, if a data track on

 

 

a CD is selected, switch to a track that con-

 

 

tains audio data.

 

 

 

NOT REC MUTE

The REC/REC MUTING button has

See page 21 for information on when the

 

been pressed at a time when the function

muting function can be used, and press the

 

cannot be performed.

REC/REC MUTING button when the

 

 

function can be performed.

 

 

 

SHORT REMAIN

Not enough time remains on the disc to con-

Replace the disc with a disc that contains

 

tinue synchronized recording from the CD

sufficient recording time.

 

player to the CDR.

 

 

 

 

CANNOT FIN

Trouble with the CD-RW has prevented

Replace the disc

 

finalization from being performed.

 

 

 

 

NO RW DISC

A CD-RW has not been inserted. Erase and

 

 

Unfinalize functions are not possible.

 

 

 

 

CANNOT ERASE

Trouble with the CD-RW has prevented an

Replace the disc

 

erase function from being performed.

 

 

 

 

CANNOT UNFIN

Trouble with the CD-RW has prevented the

Replace the disc

 

Unfinalize function from being performed.

 

 

 

 

DAO DISC

The Unfinalize function cannot be per-

 

 

formed with discs recorded using the

 

 

“DISC at Once” recording system.

 

 

 

 

SKIP FULL

The maximum number of 21 tracks on the

 

 

disc that can be skipped has been reached.

 

 

Skip marking more than 21 tracks is not

 

 

possible with this unit.

 

 

 

 

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careSelecting a Compu LINK-4 Mode switch position ConnectionsAnalog Connections Digital Optical and Coaxial Cable Connections How to use optical terminals for connectionsDigital Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTurning the Power On and Standby Mode To turn power to the unit onTo put the unit in standby mode during operation Press the CD Control OPEN/CLOSE 0 button to open the tray Listening to CDsCD player Continuous Playback Press the CD control Play 3 buttonTo stop CDR playback temporarily CDR Playback OperationsTo stop CDR playback Removing a CD from the CDRPress the CD or CDR button to select the device Using the Remote Control to Control PlaybackDirect Playback of a Specific Track Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksTo release the random playback mode Setting the repeat play modeUsing repeat mode during program or random play modes Repeat PlaybackTo cancel the Disc Lock function To adjust the pitch of a CD during playbackTo restore the playback speed to normal, press Pitch CD Playback Pitch ControlPress the SET button to start program registration Programming Playback Using Main Unit ControlsLoad a CD into the tray of the CD player Repeat to program up to a maximum StepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the SET button Press the 3 button to start program play Recording onto CD-R/RW Discs Add Finalize FeatureTo disable the Add Finalize feature Read through this section before recordingTurn the Multi JOG to select High Press the SET button Manual RecordingTo increase the recording level from Line Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onSynchronized Recording of CD player Playback To add track marks automaticallyAuto Track function off Checking a track number during recording When ADD FINALIZE? is shown in the information windowStop the CD to be recorded To stop the recording at any timeStart playback the CD to be recorded When recording completesDisc Dubbing Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingSelected tracks can be programmed and recorded Program Edit Recording Start to DUB? is shown in the information displayRecording process starts CD player to CDR Recording Options Select and enter a track numberRepeat to continue programming tracks Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionStart playing of the source unit Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Current setting is shown in the information displayMixed Input Recording ExampleCD + Line CD + MICLine + MIC Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayPress the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation DUB- Speed Resetting the Unit to Factory Default SettingsCurrent setting appears in the display High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyCannot REC Disc FullTNO Full UnlockScms Serial Copy Management System Player TroubleshootingCommon ControlAccessories Main SpecificationsCommon Specifications CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents