JVC XL-R2010BK manual Digital Connections, Digital Optical and Coaxial Cable Connections

Page 6

Digital Connections

Digital Optical and Coaxial Cable Connections

Optical Cable Input/Output Terminals

•Connect a receiver or amplifier with digital audio capability via the optical Input/Output cables. A single cable transmits stereo signals (L/R channels) as digital data.

•If analog audio connections are also being made, try using the digital connectors on the receiver/amplifier that are labeled digital terminals on the receiver or amplifier that are labeled the

same way as the analog terminals.

•Make sure the optical cable (not supplied) can be connected to the amplifier, etc. before purchasing it.

•Do not bend the optical cable at a sharp angle.

•The filament in the cable shines red when activated. This beam sends the digital signal. It is not harmful to the eyes.

Notes

•Connect an external digital recording device to the digital out- put terminal on an amplifier or receiver, and then connect the amplifier or receiver to this unit.

•The sound from an external device cannot be digitally output from this unit. To listen to the sound from the external device, connect an amplifier or receiver to the LINE OUT (PLAY) ter- minal on this unit.

•Depending on the device, a digital device is connected to the DIGITAL OUT terminal of this unit may not correctly recog- nize this unit (UNLOCKED appears in the display of the attached device.) If this happens, press the PLAY 3 button on this unit to check that the unit it is being recognized by the attached device.

CD player, etc.

To OPTICAL OUTPUT terminal

Input signal

To COAXIAL OUTPUT terminal

Coaxial digital cable (not supplied)

Optical digital cable (not supplied)

Main Unit

LINE

DIGITAL IN

DIGITAL OUT

COMPU

LINK-4

AC IN

 

 

(SYNCHRO)

L

L

 

 

 

 

 

COAXIAL

OPTICAL

COAXIAL

OPTICAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODE

 

 

R

R

 

 

 

 

CDR TD

 

 

IN

OUT

 

 

 

 

 

 

 

(REC)

( PLAY )

 

 

 

 

 

 

 

Outputsignal

Coaxial digital cable

Optical digital cable

(not supplied)

(not supplied)

To OPTICAL INPUT

To COAXIAL INPUT

terminal

terminal

Receiver or amplifier with

 

digital optical/coaxial terminal

 

How to use optical terminals for connections

1 Check that the end of the optical digital cable is not dirty, and insert it securely.

Coaxial Cable Terminals

•Coaxial Input/Output terminals are provided on the XL-R2010 for enhanced connectivity. Simply connect the corresponding Input/Output terminals of other components using coaxial cables for fast, easy data transfer.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careSelecting a Compu LINK-4 Mode switch position ConnectionsAnalog Connections Digital Optical and Coaxial Cable Connections How to use optical terminals for connectionsDigital Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTurning the Power On and Standby Mode To turn power to the unit onTo put the unit in standby mode during operation Press the CD Control OPEN/CLOSE 0 button to open the tray Listening to CDsCD player Continuous Playback Press the CD control Play 3 buttonTo stop CDR playback temporarily CDR Playback OperationsTo stop CDR playback Removing a CD from the CDRPress the CD or CDR button to select the device Using the Remote Control to Control PlaybackDirect Playback of a Specific Track Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksTo release the random playback mode Setting the repeat play modeUsing repeat mode during program or random play modes Repeat PlaybackTo cancel the Disc Lock function To adjust the pitch of a CD during playbackTo restore the playback speed to normal, press Pitch CD Playback Pitch ControlPress the SET button to start program registration Programming Playback Using Main Unit ControlsLoad a CD into the tray of the CD player Repeat to program up to a maximum StepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the SET button Press the 3 button to start program play Recording onto CD-R/RW Discs Add Finalize FeatureTo disable the Add Finalize feature Read through this section before recordingTurn the Multi JOG to select High Press the SET button Manual RecordingTo increase the recording level from Line Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onSynchronized Recording of CD player Playback To add track marks automaticallyAuto Track function off Checking a track number during recording When ADD FINALIZE? is shown in the information windowStop the CD to be recorded To stop the recording at any timeStart playback the CD to be recorded When recording completesDisc Dubbing Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingSelected tracks can be programmed and recorded Program Edit Recording Start to DUB? is shown in the information displayRecording process starts CD player to CDR Recording Options Select and enter a track numberRepeat to continue programming tracks Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionStart playing of the source unit Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Current setting is shown in the information displayMixed Input Recording ExampleCD + Line CD + MICLine + MIC Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayPress the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation DUB- Speed Resetting the Unit to Factory Default SettingsCurrent setting appears in the display High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyCannot REC Disc FullTNO Full UnlockScms Serial Copy Management System Player TroubleshootingCommon ControlAccessories Main SpecificationsCommon Specifications CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents