JVC XL-R2010BK manual Disc Dubbing, Start playback the CD to be recorded, When recording completes

Page 26

1 Start playback the CD to be recorded.

PLAY

2 Insert a recordable CD-R or CD-RW disc in the CDR disc tray.

•The disc is read.

3 While the disc is playing back the track you want to record or if that track is being paused, press CD REC (main unit/remote control).

Main Unit

 

Remote Control

 

 

 

CD REC

CD REC

“1TR DUBBING” is shown in the information display.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “1TR DUBBING”.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “OFF”. The default setting is “ON”.

The CD restarts playback from the beginning of the track and the CDR starts recording simultaneously.

•When a track is recorded, its digital signals are recorded in their original form. A new track mark is automatically placed at the beginning of the track being recorded.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process. When recording at normal speed, follow the procedure for “Setting the Unit for High-speed Recording” (see page 28) and start recording after setting the speed to normal speed. You can listen to the source while it is being recorded.

When recording completes

“STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling “ADD FINALIZE?“

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

To stop recording at any time

Press the CD or CDR STOP 7 button on the main unit or the 7 (stop) button on the remote control to end recording. The recording mode is released after “STOP DUBBING” is shown in the infor- mation display.

Notes

•There is no need to adjust the recording level.

•If the source CD being recorded from the CD player is itself a first-generation digital copy, digital recording cannot be per- formed. When this occurs, the recording type will switch from digital to analog automatically.

•Upon completion of recording, “STOP DUBBING” is shown in the information display. Always wait for the “STOP DUBBING” message to be cleared before proceeding with the next operation.

1Disc Dubbing

•You can make a complete copy of a CD that you want to record onto a CD-R/CD-RW disc. When recording a CD with song numbers but no silence between songs such as a live CD, for example, you can use the 1 DISC DUBBING feature to make a recording without any silence.

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

3

 

 

 

 

XL-R2010

CD/CDR MULTIPLE COMPACT DISC RECORDER

 

 

 

 

 

 

 

STANDBY

 

 

OPEN/CLOSE

REC SOURCE

 

 

 

 

 

OPEN/CLOSE

 

 

 

 

 

 

 

DIGITAL

CD

LINE

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

 

 

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

 

 

 

REC SOURCE

 

 

 

 

 

 

 

 

MIC

LINE

 

STOP

PLAY

PAUSE

SELECTOR

 

 

 

 

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

MIN

MAX

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

1

 

 

 

 

 

 

 

3

4,5

 

 

 

 

 

 

 

 

10

 

+10

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

REPEAT

C O N T R O L

 

 

 

 

 

 

 

 

 

 

 

MODE

CD

CDR

 

 

 

 

 

 

 

 

 

 

 

•REC

 

 

FADE

SYNCHRO

 

 

 

 

 

 

 

 

 

 

 

REC MUTING

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

3

SOURCE

 

 

 

MENU

 

 

 

 

 

 

 

 

 

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

4,5

 

 

PITCH+

 

 

 

 

 

 

 

 

 

 

 

PITCH 0

 

PITCH–

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CEL

 

 

 

 

 

 

 

 

 

 

 

RM–SXLR2010A REMOTE CONTROL

 

 

 

 

 

 

1 Stop the CD to be recorded.

PLAY

STOP

 

 

 

 

 

 

 

 

 

 

 

 

2 Load a recordable CD-R or CD-RW disc into the CDR and close the tray.

•The disc is read.

3 Press the MENU button (main unit/remote control), and then turn the MULTI JOG control on the main unit or press the 2 or 3 button on the remote control until “1 DISC DUBBING” is shown in the information display.

4 Press the SET button.

“DUBING READY?” is shown in the information display.

•Only the selected CD is recorded.

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Cleaning the cabinet Precautions FeaturesInstallation Disc careAnalog Connections Selecting a Compu LINK-4 Mode switch positionConnections Digital Optical and Coaxial Cable Connections How to use optical terminals for connectionsDigital Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTo put the unit in standby mode during operation Turning the Power On and Standby ModeTo turn power to the unit on Press the CD Control OPEN/CLOSE 0 button to open the tray Listening to CDsCD player Continuous Playback Press the CD control Play 3 buttonTo stop CDR playback temporarily CDR Playback OperationsTo stop CDR playback Removing a CD from the CDRPress the CD or CDR button to select the device Using the Remote Control to Control PlaybackDirect Playback of a Specific Track Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksTo release the random playback mode Setting the repeat play modeUsing repeat mode during program or random play modes Repeat PlaybackTo cancel the Disc Lock function To adjust the pitch of a CD during playbackTo restore the playback speed to normal, press Pitch CD Playback Pitch ControlPress the SET button to start program registration Programming Playback Using Main Unit ControlsLoad a CD into the tray of the CD player Repeat to program up to a maximum StepsPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the 3 button to start program play Recording onto CD-R/RW Discs Add Finalize FeatureTo disable the Add Finalize feature Read through this section before recordingTurn the Multi JOG to select High Press the SET button Manual RecordingTo increase the recording level from Line Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onAuto Track function off Synchronized Recording of CD player PlaybackTo add track marks automatically Checking a track number during recording When ADD FINALIZE? is shown in the information windowStop the CD to be recorded To stop the recording at any timeStart playback the CD to be recorded When recording completesDisc Dubbing Insert a recordable CD-R or CD-RW disc in the CDR disc traySelected tracks can be programmed and recorded When the first track has been stored in memoryListening Edit Recording Recording process starts Program Edit RecordingStart to DUB? is shown in the information display Repeat to continue programming tracks CD player to CDR Recording OptionsSelect and enter a track number Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionStart playing of the source unit Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Synchronized recording to the CDR from an external sourceLoad a recordable CD-R or CD-RW in the CDR disc tray Current setting is shown in the information displayMixed Input Recording ExampleLine + MIC CD + LineCD + MIC Erasing a Track or Tracks Erase Function CD-RW only Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayLoad a finalized CD-RW disc into the CDR disc tray Press the Finalize button main unit/remote controlFinalizing a Disc Press the SET button again to confirm the operation DUB- Speed Resetting the Unit to Factory Default SettingsCurrent setting appears in the display High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyCannot REC Disc FullTNO Full UnlockScms Serial Copy Management System Player TroubleshootingCommon ControlAccessories Main SpecificationsCommon Specifications CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents