JVC XL-R2010BK manual Finalizing a Disc, Press the Finalize button main unit/remote control

Page 36

Finalizing a Disc

Finalizing a disc marks the final process in recording on a CD-R or CD-RW disc. In this process, a TOC (Table Of Contents) is written to the disc. When this procedure is completed, it will be possible to play the CD-R or CD-RW disc on CD players compatible with CD- R and/or CD-RW discs.

•Please note that once a CD-R disc has been finalized, it is no longer possible to record to that disc.

•If the power of the unit is turned off or the AC power cord unplugged from the wall outlet during the finalizing process, the recording may be lost and the disc may no longer be usable.

•Even after a CD-RW disc has been finalized, further recording and/or editing is possible if the TOC information on the disc is erased using the Unfinalize function.

•When an unfinalized CD-R or CD-RW disc is loaded in the CDR and the OPEN/CLOSE 0 button is pressed to open the CDR disc tray, “FINALIZE?” is shown in the information dis- play. To skip the finalization process, press the OPEN/CLOSE 0 button one more time or the CANCEL button (main unit/ remote control). The disc will be ejected in the unfinalized state.

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY

 

OPEN/CLOSE

 

REC SOURCE

 

 

 

OPEN/CLOSE

DIGITAL CD LINE MIC

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

STOP

PLAY

PAUSE

REC SOURCE

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

 

SELECTOR

 

 

MIN

MAX

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

 

1,2

 

 

CANCEL

 

 

 

 

 

 

 

 

 

 

STANDBY/ON

CD REC

CD EDIT

FINALIZE

DISPLAY

1,2

1

 

2

3

4

 

5

6

 

7

 

8

9

 

10

+10

 

 

PLAY

REPEAT

C O N T R O L

 

MODE

CD

CDR

 

•REC

 

FADE

SYNCHRO

 

REC MUTING

 

 

 

SOURCE

 

 

MENU

 

REC

 

 

 

 

 

PITCH+

 

 

 

SET

 

 

PITCH 0

PITCH–

 

CANCEL

 

 

CHAN

 

 

 

CEL

 

RM–SXLR2010A REMOTE CONTROL

1 Press the FINALIZE button (main unit/remote control).

•“FINALIZE?” is shown in the information display.

•If you want to cancel the finalization process at this point, press the either the CDR Control OPEN/CLOSE 0 button or CAN- CEL button (main unit/remote control).

2 Press the FINALIZE button again to start the finalizing process.

•The length of time that this process requires is about 3 minutes. During the procedure, the length of the level meter is used to indicate approximately how much time is remaining until final-

ization is complete.

•The CD player of this unit is compatible with finalized CD-RW discs, however, not all CD players can play back CD-RW disc even after they have been finalized.

•During the finalization process, it will not be possible to remove or load discs in the CD player, nor is playback of CD loaded in the CD player possible.

Making Recording of a

Finalized CD-RW Disc Possible

(Unfinalize Function)

Once a CD-R disc has been finalized, further recording on that disc cannot be performed. However, if you erase the TOC (Table of Contents) on a CD-RW disc, the disc can be recorded on again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 3

 

 

 

 

 

XL-R2010

CD/CDR MULTIPLE COMPACT DISC RECORDER

 

 

 

 

 

 

 

 

STANDBY

 

 

 

OPEN/CLOSE

 

REC SOURCE

 

 

 

 

 

OPEN/CLOSE

 

 

 

 

 

 

 

 

 

DIGITAL

CD

LINE

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

 

 

 

 

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

STOP

PLAY

PAUSE

REC SOURCE

 

 

 

 

 

 

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

 

SELECTOR

 

 

 

 

 

 

 

 

MIN

MAX

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

2

4,5 CANCEL

 

 

 

 

 

 

 

 

 

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

CD REC

CD EDIT

FINALIZE

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

8

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

10

+10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

REPEAT

 

C O N T R O L

 

 

 

 

 

 

 

 

 

 

 

 

 

MODE

CD

CDR

 

 

 

 

 

 

 

 

 

 

 

 

 

•REC

 

FADE

SYNCHRO

 

 

 

 

 

 

 

 

 

 

 

 

REC MUTING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

SOURCE

SET

 

MENU

2

 

 

 

 

 

 

 

 

 

 

 

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4,5

 

PITCH+

 

 

 

 

 

 

 

 

 

 

 

 

PITCH 0

PITCH–

 

CHAN

 

CANCEL

 

 

 

 

 

 

 

 

 

 

 

 

CEL

 

 

 

 

 

 

 

 

 

 

 

 

RM–SXLR2010A REMOTE CONTROL

 

 

 

 

 

 

 

 

1 Load a finalized CD-RW disc into the CDR disc tray.

•The CD-RW and FINALIZED indicators will be shown in the display window if the CD-RW disc that has been finalized.

2 When the unit is in the stop mode, press the MENU button (main unit/remote control).

3 Turn the MULTI JOG control on the main unit or press the 2/3 (menu) button on the remote control until “UNFINALIZE” is shown in the information display.

4 Press the SET button (main unit/remote control).

•“UNFINALIZE?” is shown in the information display.

•Press the CANCEL button (main unit/remote control) to cancel the procedure and return to the normal display.

34

Page 35 Page 37
Image 36
Page 35 Page 37
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Precautions Features InstallationCleaning the cabinet Disc careSelecting a Compu LINK-4 Mode switch position ConnectionsAnalog Connections How to use optical terminals for connections Digital ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTurning the Power On and Standby Mode To turn power to the unit onTo put the unit in standby mode during operation Listening to CDs CD player Continuous PlaybackPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonCDR Playback Operations To stop CDR playbackTo stop CDR playback temporarily Removing a CD from the CDRUsing the Remote Control to Control Playback Direct Playback of a Specific TrackPress the CD or CDR button to select the device Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksSetting the repeat play mode Using repeat mode during program or random play modesTo release the random playback mode Repeat PlaybackTo adjust the pitch of a CD during playback To restore the playback speed to normal, press PitchTo cancel the Disc Lock function CD Playback Pitch ControlProgramming Playback Using Main Unit Controls Load a CD into the tray of the CD playerPress the SET button to start program registration Repeat to program up to a maximum StepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the SET button Press the 3 button to start program play Add Finalize Feature To disable the Add Finalize featureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording To increase the recording level from LineTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onSynchronized Recording of CD player Playback To add track marks automaticallyAuto Track function off When ADD FINALIZE? is shown in the information window Stop the CD to be recordedChecking a track number during recording To stop the recording at any timeWhen recording completes Disc DubbingStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingSelected tracks can be programmed and recorded Program Edit Recording Start to DUB? is shown in the information displayRecording process starts CD player to CDR Recording Options Select and enter a track numberRepeat to continue programming tracks Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionPress the Synchro button main unit/remote control Synchronized Recording from External SourcesStart playing of the source unit Synchronized recording to the CDR from an external sourceCurrent setting is shown in the information display Mixed Input RecordingLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + Line CD + MICLine + MIC Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayPress the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings Current setting appears in the displayDUB- Speed High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyDisc Full TNO FullCannot REC UnlockScms Serial Copy Management System Troubleshooting CommonPlayer ControlMain Specifications Common SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents