JVC XL-R2010BK Stop the CD to be recorded, When ADD FINALIZE? is shown in the information window

Page 25

•

1 Stop the CD to be recorded.

PLAY

STOP

 

 

 

 

 

 

 

 

 

 

 

 

2 Load a recordable CD-R or CD-RW disc into the CDR and close the tray.

•The disc is read if required.

3 Press the CD REC button (main unit/remote control) to strart recording. “DISC DUBBING” is shown in the information display

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “DISC DUBBING”.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “OFF”. The default setting is “ON”.

The CD player and CDR start simultaneously. (This is called synchronized recording)

•Recording starts from the first track of the CD.

 

Remaining play time of

Remaining recording time on

 

track being recorded

CD-R or CD-RW

1

2

3

4

CD

 

 

 

 

 

REC C D - R

 

 

 

 

 

5

6

7

8

DIGITAL

 

 

 

 

 

SYNC

4X AUTO TRACK

9

10

11

12

44.1kHz

 

 

L–

40 30 20 10 6 3 0 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

•When a digital CD is recorded, its signals are recorded in their original form. Track marks are inserted automatically where one track changes to the next and track numbers change accordingly.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process. When recording at normal speed, follow the procedure for “Setting the Unit for High-speed Recording” (see page 28) and start recording after setting the speed to normal speed. You can listen to the source while it is being recorded.

When the recording of the last song in the CD is complete, “STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling “ADD FINALIZE?”

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

Checking a track number during recording

Press the DISPLAY button on the remote control.

Remote Control

DISPLAY

 

CD-R or CD-RW

Track number

track number

To stop the recording at any time

Press the CDR or CD Control STOP 7 button on the main unit or the 7 (stop) button on the remote control. “STOP DUBBING” flashes in the information display, and the unit stops recording.

Notes

•There is no need to adjust the recording.

•If the source CD being recorded from the CD player is itself a first-generation digital copy, digital recording cannot be per- formed. When this occurs, the recording type will switch from digital to analog automatically.

•This type of recording cannot be started during CD playback. It must start from the beginning of the first track of the CD.

•When the CD REC button is pressed, the function is automati- cally switched to CD. This means that when the CD to be recorded has been selected, recording can proceed straightaway.

•Upon completion of recording, “STOP DUBBING” flashes in the information display. Always wait for the “STOP DUB- BING” message to be cleared before proceeding with the next operation.

•When you try to eject the disc from the CDR tray, “FINAL- IZE?” is shown in the information display When recording onto an unfinalized disc. To finalize the disc, press either the SET or FINALIZE button (main unit/remote control). To skip the final- ization process, press the OPEN/CLOSE 0 button one more time or the CANCEL button (main unit/remote control).

•Depending on the disc, the entire CD may not be recorded. In such a case, use the 1 Disc Dubbing feature (see page 24) to record.

Performing synchronized one-button recording of a single track

2

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY

 

OPEN/CLOSE

 

REC SOURCE

 

 

 

OPEN/CLOSE

DIGITAL CD LINE MIC

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

 

 

 

REC SOURCE

 

 

 

 

MIC

LINE

 

STOP

PLAY

PAUSE

SELECTOR

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

MIN

MAX

 

 

 

 

 

 

 

MIC

 

 

 

7 1

 

3

 

 

 

 

 

 

 

3

 

 

 

STANDBY/ON

 

CD REC

CD EDIT

FINALIZE

DISPLAY

 

 

1

 

2

3

 

 

4

 

5

6

 

 

7

 

8

9

 

 

10

+10

 

 

 

PLAY

REPEAT

C O N T R O L

1

 

MODE

CD

CDR

 

•REC

 

FADE

SYNCHRO

 

REC MUTING

 

 

7

 

 

 

 

1

 

SOURCE

 

 

MENU

 

 

REC

 

 

 

 

 

 

PITCH+

 

 

 

 

SET

 

 

 

PITCH 0

PITCH–

 

 

 

 

 

CHAN

 

 

 

 

 

CEL

 

RM–SXLR2010A REMOTE CONTROL

(To be continued on the next page)

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careConnections Selecting a Compu LINK-4 Mode switch positionAnalog Connections Digital Connections How to use optical terminals for connectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTo turn power to the unit on Turning the Power On and Standby ModeTo put the unit in standby mode during operation CD player Continuous Playback Listening to CDsPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonTo stop CDR playback CDR Playback OperationsTo stop CDR playback temporarily Removing a CD from the CDRDirect Playback of a Specific Track Using the Remote Control to Control PlaybackPress the CD or CDR button to select the device Press the number buttons of the track you want to playSkipping Tracks Forward and Reverse SearchUsing repeat mode during program or random play modes Setting the repeat play modeTo release the random playback mode Repeat PlaybackTo restore the playback speed to normal, press Pitch To adjust the pitch of a CD during playbackTo cancel the Disc Lock function CD Playback Pitch ControlLoad a CD into the tray of the CD player Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat to program up to a maximum StepsPress the Play Mode button Programming Playback Using the Remote ControlPress the SET button Press the 3 button to start program play To disable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingTo increase the recording level from Line Manual RecordingTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceAuto Track function on When recording is completeTo add track marks automatically Synchronized Recording of CD player PlaybackAuto Track function off Stop the CD to be recorded When ADD FINALIZE? is shown in the information windowChecking a track number during recording To stop the recording at any timeDisc Dubbing When recording completesStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memorySelected tracks can be programmed and recorded Start to DUB? is shown in the information display Program Edit RecordingRecording process starts Select and enter a track number CD player to CDR Recording OptionsRepeat to continue programming tracks Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Current setting is shown in the information displayLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + MIC CD + LineLine + MIC Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyFinalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default SettingsDUB- Speed High CD- R4x,CD- RW2xTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesTNO Full Disc FullCannot REC UnlockScms Serial Copy Management System Common TroubleshootingPlayer ControlCommon Specifications Main SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents