JVC XL-R2010BK manual Program Edit Recording, Start to DUB? is shown in the information display

Page 28

Note

•Up to 32 steps can be included in the programming. The same track cannot be programmed twice.

When there is not much recording time left on the CD-R or CD- RW disc, tracks that are longer than the remaining time (pre-cal- culated) can be programmed but “NO REM” is shown in the information display.

5 Press the CDR Control PLAY 3 or REC/REC MUTING button on the main unit or the 3 (play) or REC/REC MUTING button on the remote control. Recording of the selected songs will begin.

“START TO DUB?” is shown in the information display

When "ADD FINALIZE?" is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “OFF”. The default setting is “ON”.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “ADD FINALIZE?”.

The recording process starts.

•Only the tracks selected from the CDs in the CD player are recorded.

•Playback starts from the first track seleted. The playing time of the track and the remaining playing time of the CD-R or CD- RW disc are shown in the information display.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process.

When recording at normal speed, follow the procedure for “Setting the Unit for High-speed Recording” (see page 28) and start record- ing after setting the speed to normal speed. You can listen to the source while it is being recorded.

When recording completes

"STOP DUBBING" flashes and recording automatically stops.

When recorded without canceling "ADD FINALIZE?"

"FINALIZE" is shown in the information window after recording is stopped and finalization is automatically performed.

To stop the recording at any time

Press the CD Control STOP 7, CDR Control STOP 7 or CANCEL button on the main unit or the 7 (stop) or CANCEL button on the remote control to stop the recording process. The recording mode is released after “STOP DUBBING” is shown in the information display.

Notes

•There is no need to adjust the recording level.

•The last program information (the most recently created pro- gram still stored in the unit's memory) will be erased if the tray of the CD player are opened.

Program Edit Recording

This type of recording allows you to make a program of your favor- ite tracks on the CD loaded in the CD player in any order you like.

 

1

 

2

4,5

XL-R2010

CD/CDR MULTIPLE COMPACT DISC RECORDER

 

 

STANDBY

OPEN/CLOSE

REC SOURCE

OPEN/CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

 

 

 

MIX BLANCE

 

 

STOP

PLAY

PAUSE

REC SOURCE

 

 

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

 

SELECTOR

 

 

 

 

MIN

MAX

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

3

 

 

 

 

4,5

 

6

CANCEL

 

 

 

 

 

 

 

STANDBY/ON

3

 

 

 

 

 

 

 

 

 

CD REC

CD EDIT

FINALIZE

DISPLAY

 

 

 

 

 

1 2 3

4 5 6

7 8 9

10 +10

PLAY

C O N T R O L

MODE REPEAT

CD

 

CDR

•REC

FADE SYNCHRO

REC MUTING

4,5

6

SOURCE

MENU

REC

 

PITCH+

SET

4,5

PITCH 0

PITCH–

CANCEL

CA

 

 

NCEL

 

RM–SXLR2010A REMOTE CONTROL

1 Load the CD in the CD player.

2 Load a recordable CD-R or CD-RW disc in the CDR tray.

•The disc is read.

•The default setting is for the CD to be recorded digitally. If you press the REC SOURCE SELECTOR button and select CD ANALOG you can also record the CD using analog sound. You can listen to the source when recording using analog sound, but you cannot use high-speed recording.

•When recording SCMS (see page 41) discs, the disc is recorded using analog sound.

3 Press the CD EDIT button (main unit/remote control) twice to select the Program Edit mode.

Main Unit

 

Remote Control

CD EDIT

CD EDIT

 

 

“PROGRAM EDIT” is shown in the information display for 3 sec- onds, the P EDIT edit recording indicator is shown in the display window.

•The unit may be required to read the TOC (Table of Contents) of the CDs loaded in the CD player. If this is done, “TOC READING” is shown in the information display.

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Precautions Features InstallationCleaning the cabinet Disc careConnections Selecting a Compu LINK-4 Mode switch positionAnalog Connections How to use optical terminals for connections Digital ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTo turn power to the unit on Turning the Power On and Standby ModeTo put the unit in standby mode during operation Listening to CDs CD player Continuous PlaybackPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonCDR Playback Operations To stop CDR playbackTo stop CDR playback temporarily Removing a CD from the CDRUsing the Remote Control to Control Playback Direct Playback of a Specific TrackPress the CD or CDR button to select the device Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksSetting the repeat play mode Using repeat mode during program or random play modesTo release the random playback mode Repeat PlaybackTo adjust the pitch of a CD during playback To restore the playback speed to normal, press PitchTo cancel the Disc Lock function CD Playback Pitch ControlProgramming Playback Using Main Unit Controls Load a CD into the tray of the CD playerPress the SET button to start program registration Repeat to program up to a maximum StepsPress the Play Mode button Programming Playback Using the Remote ControlPress the SET button Press the 3 button to start program play Add Finalize Feature To disable the Add Finalize featureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording To increase the recording level from LineTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onTo add track marks automatically Synchronized Recording of CD player PlaybackAuto Track function off When ADD FINALIZE? is shown in the information window Stop the CD to be recordedChecking a track number during recording To stop the recording at any timeWhen recording completes Disc DubbingStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memorySelected tracks can be programmed and recorded Start to DUB? is shown in the information display Program Edit RecordingRecording process starts Select and enter a track number CD player to CDR Recording OptionsRepeat to continue programming tracks Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionPress the Synchro button main unit/remote control Synchronized Recording from External SourcesStart playing of the source unit Synchronized recording to the CDR from an external sourceCurrent setting is shown in the information display Mixed Input RecordingLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + MIC CD + LineLine + MIC Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayFinalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings Current setting appears in the displayDUB- Speed High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyDisc Full TNO FullCannot REC UnlockScms Serial Copy Management System Troubleshooting CommonPlayer ControlMain Specifications Common SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents