JVC XL-R2010BK manual Main Specifications, CD Player Section, CDR Section, Common Specifications

Page 45

Main Specifications

The unit’s specifications and exterior are subject to change without notice due to improvements.

CD Player Section

System

Compact disc digital audio system

Pitch control

±12%

Signal-to-noise ratio

97dB

Dynamic range (1 kHz)

93dB

Frequency response

20 - 20kHz

Wow and flutter

Less than measurable limit

Total harmonic distortion

0.0063%

CDR Section

System

Compact disc digital audio recording

 

system

Sampling frequency

44.1kHz

Frequency response

20 - 20kHz

Inputs: Analog (LINE IN) Minimum input level: 300mV

 

(Full scale –12dB)/50kΩ

Digital (optical)

Input level: –23dBm - –15dBm

 

(With sampling rates 32kHz, 44.1kHz,

 

48kHz)

Microphone

Minimum input level: 3mV (Full scale

 

–12dB)/600Ω- 10kΩ matching imped-

 

ance

Signal-to-noise ratio

94dB (during playback)

Dynamic range (1 kHz)

91dB (during playback)

Wow and flutter

Less than measurable limit

Total harmonic distortion

0.0063% (during playback)

Common Specifications

Output terminals:

 

Analog

LINE x 1 set, 2V/5kΩ (Full scale)

 

Headphones x 1, 4mW/32Ω,

 

8Ω ~ 1kΩ matching impedance

Digital

OPTICAL x 1, –21dBm - –15 dBm

 

COAXIAL x 1

Other terminals

COMPU LINK-4/SYNCHRO x 2

Power requirements

120V , 60Hz

Power consumption

19W power ON mode

 

5W STANDBY mode

Dimensions (W x H x D)

435mm x 73mm x 329mm

 

(17-3/16in. x 2-7/8in. x 13in.)

Mass

Approx. 3.9kg (8.6lbs)

Accessories

Remote control

RM-SXLR2010A x 1

Batteries

AA (15F), R6, SUM-3

 

dry batteries

x 2

 

(to check operation of remote control)

Pin cables

 

x 2

COMPU LINK-4 cable

x 1

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careSelecting a Compu LINK-4 Mode switch position ConnectionsAnalog Connections Digital Connections How to use optical terminals for connectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTurning the Power On and Standby Mode To turn power to the unit onTo put the unit in standby mode during operation CD player Continuous Playback Listening to CDsPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonTo stop CDR playback CDR Playback OperationsTo stop CDR playback temporarily Removing a CD from the CDRDirect Playback of a Specific Track Using the Remote Control to Control PlaybackPress the CD or CDR button to select the device Press the number buttons of the track you want to playSkipping Tracks Forward and Reverse SearchUsing repeat mode during program or random play modes Setting the repeat play modeTo release the random playback mode Repeat PlaybackTo restore the playback speed to normal, press Pitch To adjust the pitch of a CD during playbackTo cancel the Disc Lock function CD Playback Pitch ControlLoad a CD into the tray of the CD player Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat to program up to a maximum StepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the SET button Press the 3 button to start program play To disable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingTo increase the recording level from Line Manual RecordingTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceAuto Track function on When recording is completeSynchronized Recording of CD player Playback To add track marks automaticallyAuto Track function off Stop the CD to be recorded When ADD FINALIZE? is shown in the information windowChecking a track number during recording To stop the recording at any timeDisc Dubbing When recording completesStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingSelected tracks can be programmed and recorded Program Edit Recording Start to DUB? is shown in the information displayRecording process starts CD player to CDR Recording Options Select and enter a track numberRepeat to continue programming tracks Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Current setting is shown in the information displayLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + Line CD + MICLine + MIC Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyPress the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default SettingsDUB- Speed High CD- R4x,CD- RW2xTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesTNO Full Disc FullCannot REC UnlockScms Serial Copy Management System Common TroubleshootingPlayer ControlCommon Specifications Main SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents