JVC XL-R2010BK manual Press the 3 button to start program play

Page 20

6 Repeat Step 5 to program up to a maximum of

32steps.

•If you try to program over 32 steps, “MEMORY FULL” will be shown in the information display, and the programming func- tion ends automatically.

•Pressing the 7 (stop) button ends the programming function.

•Operation stops automatically when all of the programmed tracks have been played.

7 Press the 3 button to start program play.

•Operation stops automatically when all the programmed tracks have been played.

•During playback, track number and play time of the track are shown in the information display.

•The numbers of the tracks that have been played are cleared from the music calendar. They are displayed again when pro- grammed play is completed.

•If the 3 (play) button is pressed at a specific step in a program, the programming function will end and playback will start from Step 01, not the step currently shown in the information display.

To clear a step (track) from the program

To remove a programmed track, while in the CD stop mode, press the 4 (reverse skip) or ¢ (forward skip) buttons until the track you want to erase is shown in the information display. Press the CANCEL button to erase the track from the program. The step number for each track following the one erased is automatically reduced by one (i.e., steps are renumbered). To erase the entire pro- gram, press the CANCEL button until “PG NO PROGRAM” is shown in the information display.

To change the contents of the program

In the CD stop mode, press the SET button followed by the CAN- CEL button. Programmed tracks will be erased in the reverse order of when they were entered (starting from the last track pro- grammed). Press the CANCEL button twice to erase one track. Continue erasing in this manner until all of the tracks you wanted to remove are erased. Enter new tracks into the program by follow- ing programming Step 5.

To check the contents of the program

To check the tracks you have entered into the program, press the 7 (stop) button, and use the 4 (reverse skip) or ¢ (forward skip) buttons to review the programmed tracks. The program steps (PG S**) and track numbers will be shown in the information display one at a time as you toggle through the program (S: Step; **: step number).

To return to continuous playback

In the CD stop mode, repeatedly press the PLAY MODE button on the remote control until the total playing time is shown in the infor- mation display.

Remote Control

PLAY

MODE

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Precautions Features InstallationCleaning the cabinet Disc careAnalog Connections Selecting a Compu LINK-4 Mode switch positionConnections How to use optical terminals for connections Digital ConnectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsComponents Main UnitDisplay Window Using the Remote Control Remote ControlUsing the Remote Control Inserting the BatteriesTo put the unit in standby mode during operation Turning the Power On and Standby ModeTo turn power to the unit on Listening to CDs CD player Continuous PlaybackPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonCDR Playback Operations To stop CDR playbackTo stop CDR playback temporarily Removing a CD from the CDRUsing the Remote Control to Control Playback Direct Playback of a Specific TrackPress the CD or CDR button to select the device Press the number buttons of the track you want to playForward and Reverse Search Skipping TracksSetting the repeat play mode Using repeat mode during program or random play modesTo release the random playback mode Repeat PlaybackTo adjust the pitch of a CD during playback To restore the playback speed to normal, press PitchTo cancel the Disc Lock function CD Playback Pitch ControlProgramming Playback Using Main Unit Controls Load a CD into the tray of the CD playerPress the SET button to start program registration Repeat to program up to a maximum StepsPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the 3 button to start program play Add Finalize Feature To disable the Add Finalize featureRecording onto CD-R/RW Discs Read through this section before recordingManual Recording To increase the recording level from LineTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceWhen recording is complete Auto Track function onAuto Track function off Synchronized Recording of CD player PlaybackTo add track marks automatically When ADD FINALIZE? is shown in the information window Stop the CD to be recordedChecking a track number during recording To stop the recording at any timeWhen recording completes Disc DubbingStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc traySelected tracks can be programmed and recorded When the first track has been stored in memoryListening Edit Recording Recording process starts Program Edit RecordingStart to DUB? is shown in the information display Repeat to continue programming tracks CD player to CDR Recording OptionsSelect and enter a track number Setting the Unit for High-speed Recording Setting the Auto Track Spacing FunctionPress the Synchro button main unit/remote control Synchronized Recording from External SourcesStart playing of the source unit Synchronized recording to the CDR from an external sourceCurrent setting is shown in the information display Mixed Input RecordingLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleLine + MIC CD + LineCD + MIC Erasing a Track or Tracks Erase Function CD-RW only Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Erasing All Tracks Disc Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc trayLoad a finalized CD-RW disc into the CDR disc tray Press the Finalize button main unit/remote controlFinalizing a Disc Press the SET button again to confirm the operation Resetting the Unit to Factory Default Settings Current setting appears in the displayDUB- Speed High CD- R4x,CD- RW2xSleep Timer Turn the Multi JOG control to select the time intervalWhat is Compu LINK? Compu Link FunctionCD and CDR Messages Message Significance RemedyDisc Full TNO FullCannot REC UnlockScms Serial Copy Management System Troubleshooting CommonPlayer ControlMain Specifications Common SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents