JVC XL-R2010BK manual CD + Line, Cd + Mic, Line + MIC

Page 33

•Select “CD + LINE” to mix and record a CD loaded in the CD player with the signals from an external source via the LINE IN terminal.

•Select “CD + MIC” to mix and record a CD loaded in the CD player with the signals from a microphone plugged into the MIC jack.

•Select “LINE + MIC” to mix and record the signals from an external source connected via the LINE IN terminal and those from a microphone plugged into the MIC jack.

3 Press the REC/REC MUTING button (main

unit/remote control) to put the CDR in the recording pause mode.

•The remaining recording time on the disc is shown in the infor- mation display.

4 Press the MENU button (main unit/remote control) and select the sources for setting the recording level. Use the MULTI JOG/REC LEVEL and MIX BALANCE controls to adjust the recording level and mixing balance while playing the two sources. .

MULTI JOG / REC LEVEL

–+

MIX BLANCE

LINE

CD

MIX BLANCE

LINE

CD

MIC

LINE

MIC

LINE

 

 

CD + LINE

CD recording level is

Line input recording

 

reduced.

level is reduced.

 

 

 

CD + MIC

CD recording level is

MIC input recording

 

reduced.

level is reduced.

 

 

 

LINE + MIC

Line input recording

MIC input recording

 

level is reduced.

level is reduced.

•Adjust the recording level so that the 0 dB display of the level meter is not exceeded when the highest signal is applied.

•If the CD input is selected for mixed recording, the pitch con- trols may be used to adjust the speed of CD playback for mixing and recording purposes. (see page 15)

•If the microphone level is set too high, a loud howling sound may be emitted from the speakers. If this occurs, turn down the volume of the microphone by turning down the volume of the amplifier/receiver powering the speakers you are using to moni- tor the sound.

•When you have finished adjusting the recording level and the mix balance, set the sources back to the point where you want to start recording from.

5 Start playback of the sources to be recorded.

6 Press the CDR Control PLAY 3 button on the main unit or the 3 (play) button on the remote control to start recording.

To stop recording at any time

Press the CDR Control STOP 7 button on the main unit or the 7 (stop) button on the remote control. The Play 3 indicator in the display window will flash and operation stops.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careSelecting a Compu LINK-4 Mode switch position ConnectionsAnalog Connections Digital Connections How to use optical terminals for connectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTurning the Power On and Standby Mode To turn power to the unit onTo put the unit in standby mode during operation CD player Continuous Playback Listening to CDsPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonTo stop CDR playback CDR Playback OperationsTo stop CDR playback temporarily Removing a CD from the CDRDirect Playback of a Specific Track Using the Remote Control to Control PlaybackPress the CD or CDR button to select the device Press the number buttons of the track you want to playSkipping Tracks Forward and Reverse SearchUsing repeat mode during program or random play modes Setting the repeat play modeTo release the random playback mode Repeat PlaybackTo restore the playback speed to normal, press Pitch To adjust the pitch of a CD during playbackTo cancel the Disc Lock function CD Playback Pitch ControlLoad a CD into the tray of the CD player Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat to program up to a maximum StepsProgramming Playback Using the Remote Control Press the Play Mode buttonPress the SET button Press the 3 button to start program play To disable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingTo increase the recording level from Line Manual RecordingTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceAuto Track function on When recording is completeSynchronized Recording of CD player Playback To add track marks automaticallyAuto Track function off Stop the CD to be recorded When ADD FINALIZE? is shown in the information windowChecking a track number during recording To stop the recording at any timeDisc Dubbing When recording completesStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayWhen the first track has been stored in memory Listening Edit RecordingSelected tracks can be programmed and recorded Program Edit Recording Start to DUB? is shown in the information displayRecording process starts CD player to CDR Recording Options Select and enter a track numberRepeat to continue programming tracks Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Current setting is shown in the information displayLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + Line CD + MICLine + MIC Special Recording Edit Operations Skipping a Recorded Track on a CD-R or CD-RW Track SkipErasing a Track or Tracks Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyPress the Finalize button main unit/remote control Finalizing a DiscLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default SettingsDUB- Speed High CD- R4x,CD- RW2xTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesTNO Full Disc FullCannot REC UnlockScms Serial Copy Management System Common TroubleshootingPlayer ControlCommon Specifications Main SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents