JVC XL-R2010BK manual Press the SET button again to confirm the operation

Page 37

5 Press the SET button again to confirm the operation.

•“UNFINALIZE” is shown in the information display as the unfinalizing procedure is performed. The procedure takes about 2 minutes, and the level meter is used to indicate approximately how much time is remaining until unfinalization is complete. Upon completion, the normal display is shown.

Bypassing the FS Converter (Sampling Frequency Converter*) for More Efficient Digital Recording

* known as Sampling Rate Converter.

The FS converter of this unit performs the conversion of digital sig- nals from sources that use sampling frequencies other than 44.1kHz to the sampling frequency of 44.1kHz, which is necessary for recording the signals to a CD-R or CD-RW disc.

•When the FS converter is turned off, the converter is bypassed if the digital signal of the source has a sampling frequency of 44.1kHz and when analog and multiple input recording are per- formed.

•If source sampling frequencies of 32kHz or 48kHz are detected, the FS converter is activated automatically and the signal is routed through it.

•When the FS converter is turned on, all signals to be recorded are routed through it regardless of the sampling frequency, even the 44.1kHz digital signal is passed through it as the converter works as a filter to reduce signal fluctuation in the disc record- ing. For this reason, having the function set to “ON” is recom- mended for most recording purposes.

•When recording specially encoded discs such as dts*1, HDCD*2, etc., be sure to turn the converter off (setting to

“OFF”) using the following procedure (see Step 4).

*1dts is trademark of Digital Theater Systems, Inc.

*2HDCDis a registered trademark of Pacific Microsonic, Inc.

Note

•When recording from the CD player, the sampling rate con- verter is always turned off.

2,4

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY

 

OPEN/CLOSE

 

REC SOURCE

 

 

 

OPEN/CLOSE

DIGITAL CD LINE MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

 

 

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

 

 

 

REC SOURCE

 

 

 

 

 

 

 

 

MIC

LINE

 

STOP

PLAY

PAUSE

SELECTOR

 

 

 

 

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

 

 

MIN

MAX

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

1

 

3,5 CANCEL

 

 

 

 

 

 

 

 

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

 

CD REC

CD EDIT

FINALIZE

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

3

 

 

 

 

 

 

 

 

 

 

 

 

4

 

5

6

 

 

 

 

 

 

 

 

 

 

 

 

7

 

8

9

 

 

 

 

 

 

 

 

 

 

 

 

10

+10

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

REPEAT

C O N T R O L

 

 

 

 

 

 

 

 

 

 

 

 

MODE

CD

CDR

 

 

 

 

 

 

 

 

 

 

 

 

•REC

 

FADE

SYNCHRO

 

 

 

 

 

 

 

 

 

 

 

 

REC MUTING

 

 

 

 

 

 

 

 

 

 

 

 

2,4

SOURCE

 

 

MENU

1

 

 

 

 

 

 

 

 

 

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

3,5

 

PITCH+

 

 

 

 

 

 

 

 

 

 

 

PITCH 0

PITCH–

CHAN

CANCEL

 

 

 

 

 

 

 

 

 

 

 

CEL

 

 

 

 

 

 

 

 

 

 

 

 

RM–SXLR2010A REMOTE CONTROL

 

 

 

 

 

 

 

1 When the unit is in the stop mode, press the MENU button (main unit/remote control).

2 Turn the MULTI JOG control on the main unit or press the 2/3 (menu) button on the remote control until “CONVERTER” is shown in the information display.

3 Press the SET button (main unit/remote control).

•The “CONVERTER ON” is shown and “ON” flashes in the information display. (The default setting is “ON”.)

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

4 Turn the MULTI JOG control on the main unit or press the 2/3 (menu) button on the remote control to select “ON” or “OFF”.

•Press the CANCEL button (main unit/remote control) if you do not want to perform this procedure. The setting is not changed.

5 Press the SET button (main unit/remote control).

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careConnections Selecting a Compu LINK-4 Mode switch positionAnalog Connections Digital Connections How to use optical terminals for connectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTo turn power to the unit on Turning the Power On and Standby ModeTo put the unit in standby mode during operation CD player Continuous Playback Listening to CDsPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonTo stop CDR playback CDR Playback OperationsTo stop CDR playback temporarily Removing a CD from the CDRDirect Playback of a Specific Track Using the Remote Control to Control PlaybackPress the CD or CDR button to select the device Press the number buttons of the track you want to playSkipping Tracks Forward and Reverse SearchUsing repeat mode during program or random play modes Setting the repeat play modeTo release the random playback mode Repeat PlaybackTo restore the playback speed to normal, press Pitch To adjust the pitch of a CD during playbackTo cancel the Disc Lock function CD Playback Pitch ControlLoad a CD into the tray of the CD player Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat to program up to a maximum StepsPress the Play Mode button Programming Playback Using the Remote ControlPress the SET button Press the 3 button to start program play To disable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingTo increase the recording level from Line Manual RecordingTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceAuto Track function on When recording is completeTo add track marks automatically Synchronized Recording of CD player PlaybackAuto Track function off Stop the CD to be recorded When ADD FINALIZE? is shown in the information windowChecking a track number during recording To stop the recording at any timeDisc Dubbing When recording completesStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc trayListening Edit Recording When the first track has been stored in memorySelected tracks can be programmed and recorded Start to DUB? is shown in the information display Program Edit RecordingRecording process starts Select and enter a track number CD player to CDR Recording OptionsRepeat to continue programming tracks Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Current setting is shown in the information displayLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleCD + MIC CD + LineLine + MIC Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyFinalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default SettingsDUB- Speed High CD- R4x,CD- RW2xTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesTNO Full Disc FullCannot REC UnlockScms Serial Copy Management System Common TroubleshootingPlayer ControlCommon Specifications Main SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents