American Dryer Corp Super AD-30 manual OPL Models

4.Non-Microprocessor (Computer) Models

a.Turn power on to the dryer.

b.Insert coin(s) - rotary meter type ONLY.

c.Select temperature by using rocker switch and selecting "HI TEMP," "LO TEMP," or "PERM PRESS."

d.Press "Push to Start" button to start the cycle.

e.Upon completion of the drying and cooling cycles the dryer will shut off.

NOTE: If the door is opened during a cycle, both the heat and motor will stop. Continuation of the cycle will only resume after the door has been closed, and the "Push to Start" button is pressed.

OPL MODELS

1.To start the dryer:

a.Microprocessor (computer) dryers

1)The L.E.D. (light emitting diode) display will read "FILL."

2)Press the "E" on the touch pad of the keyboard.

3)The L.E.D. display will quickly show "Ld30," "LC04," "F180." The dryer will start, and the L.E.D. display will show "dr30."

b.Dual Timer Dryers

1)Turn drying timer knob for a time of 20 minutes.

2)Select "High Temp."

3)Push "Push To Start" switch.

4)To stop dryer, open the main door.

37