SHUTDOWN INSTRUCTIONS
If the dryer is to be shutdown (taken out of service) for a period of time, the following must be performed:
Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
Discontinue the heat supply:
GAS MODELS: discontinue the gas supply. SHUT OFF external gas supply shutoff valve.
STEAM MODELS: discontinue the steam supply. SHUT OFF external (location furnished) shutoff valve.
SERVICE/PARTS
INFORMATION
SERVICE
Service must be performed by a qualified trained technician, service agency, or gas supplier. If service is required, contact the reseller from whom the ADC equipment was purchased. If the reseller cannot be contacted or is unknown, contact the ADC Service Department for a reseller in your area.
NOTE:
When contacting the ADC Service Department, ! be sure to give them the correct model number and serial number so that your inquiry
is handled in an expeditious manner.
PARTS
Replacement parts should be purchased from the reseller from whom the ADC equipment was purchased. If the reseller cannot be contacted or is unknown, contact the ADC Parts Department for a reseller in your area. Parts may also be purchased directly from the factory by calling the ADC Parts Department at (508)
NOTE:
!When ordering replacement parts from the ADC reseller or the ADC factory be sure to give them the correct model number and serial number so that your parts order can be processed in an expeditious manner.
WARRANTY INFORMATION
RETURNING WARRANTY CARDS
Before any dryer leaves the ADC factory test area, a warranty card is placed on the back side of the main door glass. These warranty cards are intended to serve the customer where we record the individual installation date and warranty information to better serve you should you file a warranty claim.
If a warranty card did not come with your dryer, contact the ADC Warranty Department or the ADC Service Department at (508)
IMPORTANT:
!A separate warranty card must be completed and returned for each individual dryer.
NOTE:
Be sure to include the installation date when returning the warranty card(s).
WARRANTY
For a copy of the ADC commercial warranty covering your particular dryer(s), contact the ADC reseller from whom you purchased the equipment and request a dryer warranty form. If the reseller cannot be contacted or is unknown, warranty information can be obtained from the factory by contacting the ADC Warranty Department at (508)
NOTE:
!Whenever contacting the ADC factory for warranty information, be sure to have the dryer’s model number and serial number available so that your inquiry can be handled in an expeditious manner.
RETURNING WARRANTY PARTS
ALL dryer or parts warranty claims or inquires should be addressed to the ADC Warranty Parts Department. To expedite processing, the following procedures must be followed:
No parts are to be returned to ADC without prior written authorization (“Return Material Authorization” [R.M.A.]) from the factory.
NOTE:
!An R.M.A. is valid for only thirty (30) days from date of issue.
The R.M.A. issued by the factory, as well as any other correspondence pertaining to the returned part(s), must be included inside the package with the failed merchandise.
Each part must be tagged with the following information:
•Model number and serial number of the dryer from which part was removed.
•Nature of failure (be specific).
•Date of dryer installation.
•Date of part failure.
•Specify whether the part(s) being returned is for a replacement, a credit, or a refund.
NOTE:
!If a part is marked for a credit or a refund, the invoice number covering the purchase of the replacement part must be provided.
Warranty tags (ADC P/N 450064) are available at “no charge” from ADC upon request.
The company returning the part(s) must clearly note the complete company name and address on the outside of the package.
www.amdry.com | 19 |