Maytag MD68 warranty Installing the Drying Rack, Using the Drying Rack, Storing the Drying Rack

DRYING RACK (SELECT MODELS)

INSTALLING THE DRYING RACK
1)	Open dryer door.
2)	Position drying rack in tumbler placing the two rear legs
3)	in the two recessed areas in the back wall of the dryer.
	Place the front lip of the drying rack on top of the lint
4)	filter.
	Place items to be dried on the rack, leaving space
5)	between them so air can reach all the surfaces.
	Close the dryer door.
6)	Use the Time Dry cycle. Select time according to	Handle
	moisture and weight of item. Start the dryer. It may be
	necessary to reset the timer if a longer drying time is	Front	Rear Legs
	needed.

USING THE DRYING RACK

SUGGESTED ITEMS	SUGGESTED
	TEMP. SETTINGS
Washable sweaters (block to	Heat
shape and lay flat on rack)
Stuffed toys (cotton or	Heat
polyester fiber filled)
Stuffed toys (foam or	Air Fluff
rubber filled)
Foam rubber pillows	Air Fluff
Sneakers	Air Fluff or Heat

WARNING

Drying foam rubber, plastic or rubber on a heat setting may cause damage to the item and could lead to a fire hazard.

STORING THE DRYING RACK
On Dryer Sides:
The drying rack hanger fits between the dryer top and the
dryer cabinet.
1)	Place the flange on the hanger in the seam between the
2)	top and the cabinet. Push all the way in.
	Face the top of the drying rack toward the side of the	Flange
3)	dryer cabinet.	Lip
	Place the drying rack handle over the lip of the hanger.
On Dryer Back:
1)	Place the drying rack hanger between the dryer top and
	the dryer cabinet just below the back of the control
2)	panel.
	Place the flange in the seam and push all the way in.
3)	Face the top of the drying rack toward the back of the
4)	dryer cabinet.
	Place the drying rack handle on the lip of the hanger.

NOTE: If not included with your dryer, contact your Maytag dealer for the accessory kit MAL1100AXX

or call 1-877-232-6771 USA or 1-800-688-8408 Canada.

10