Sensor Cycle Settings, Timed Cycles, Timed Dry

Maytag W10057354A manual Sensor Cycle Settings, Timed Cycles, Timed Dry, Quick Dry, Steam Cycles

Sensor Cycle Settings

Sensor Cycles	Temperature	Time*
Load Type		(Minutes)

SANITIZE	High	60
Towels, bedding, children’s clothing

HEAVY DUTY	High	50
Heavyweight items, towels, jeans

NORMAL	Regular	40
Permanent press blends, work
clothes, sheets

BULKY ITEMS	Regular	55
Jackets, comforters, pillows

DELICATE	Medium	30
Lingerie, blouses, washable woolens

SUPER DELICATE	Low	25
Lingerie, blouses, washable woolens

*Estimated Time with Sensor Cycles Dryness (Normal) setting. Time will vary depending on load type and load size.

Timed Cycles

Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the TIME ADJUST up or down buttons.

Timed Dry

Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is also useful for drying heavyweight and bulky items such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a Low temperature setting.

Quick Dry

Use this cycle for drying small loads or loads that need a short drying time.

Manual Preset Cycle Settings

Timed Cycles	Temperature	Time
Load Type		(Minutes)

TIMED DRY	High	40
Heavyweight items, bulky items,
bedspreads, work clothes

QUICK DRY	High	25
Small loads

Steam Cycles

In these cycles, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble at Regular heat for the duration of the cycle. The Steam cycles include Rapid Refresh and Custom Refresh. The heat setting and cycle time are not adjustable for the Rapid Refresh cycle, but can be adjusted for the Custom Refresh cycle.

NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without.

Use of a fabric softener sheet is not recommended with steam cycles as it may cause temporary staining on the clothes.

Rapid Refresh

This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits and synthetic garments.

Custom Refresh

This cycle uses water and heat to help smooth out wrinkles from items such as clothes packed in a suitcase or wrinkled from being left in the dryer too long.

Steam Preset Cycle Settings

Timed Cycles	Default	Default Time
Load Type	Temperature*	(Minutes)*

RAPID REFRESH	Regular	15
Helps to smooth out
wrinkles and reduce odors
from loads consisting of one
to four dry items.

CUSTOM REFRESH	Regular	20
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.

*NOTE: The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Regular and High temperature settings can be used for the Custom Refresh cycle.