INSTALLATION INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
For a garage installation, you will need to place the 10" (25.4 cm) pedestal at least
9" (22.9 cm) above the floor. You will need to place the 15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above the floor.
8" or 10" pipe wrench
8" or 10" adjustable wrench (for gas connections)
Adjustable wrench that opens to 1" (2.5 cm) or
1/4" nut driver or socket wrench (recommended)
Level
Knife
Vent clamps
Caulking gun and compound (for installing new exhaust vent)
Pliers
Tape measure
A | B |
A. 10" (25.4 cm) pedestal | |
Parts supplied
Remove parts package from dryer drum. Check that all parts are included.
A B CDE
A. Leveling legs (4)
B. “Y” connector
C. Short inlet hose
D. Inlet hose with
E. Rubber washer
NOTE: Do not use leveling legs supplied with dryer if installing on a pedestal.
Parts needed
Check local codes. Check existing electrical supply and venting. See “Electrical Requirements” and “Venting Requirements” before purchasing parts.
Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your dryer. For further information, please refer to the “Assistance or Service” section.
Optional Pedestal
Are you placing the dryer on a pedestal? You have the option of purchasing pedestals of different heights separately for this dryer. You may select a 10" (25.4 cm) or 15.5" (39.4 cm) pedestal with drawer. The pedestal will add to the total height of the dryer for a total height of approximately 48" (121.9 cm) or 53.5" (135.9 cm), respectively.
B. 15.5" (39.4 cm) pedestal |
The pedestals are available in several colors. To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section.
Pedestal Height | Color | Part Number |
10" (25.4 cm) | White | MHP1000SQ |
|
|
|
15.5" (39.4 cm) | White | XHP1550VW |
|
|
|
15.5" (39.4 cm) | Crimson | XHP1550VF |
|
|
|
15.5" (39.4 cm) | Evergreen | XHP1550VP |
|
|
|
15.5" (39.4 cm) | Oxide | XHP1550VJ |
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit. To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number 8212640.
Door Reversal Kit
Are you planing to reverse the door swing direction on your PERFORMANCE SERIES dryer? To do so, you will need to purchase a Door Reversal Kit.
To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number W10200372.
Backguard
If you are installing your PERFORMANCE SERIES washer and dryer and wish to avoid having loose items fall behind your machines, you may purchase a pair of washer/dryer backguards. These will reduce the chance of items falling behind the machines during operation.
To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number 8558694 (White).
5