DISTANCE AND DIRECTION MEASUREMENTS | 5 |
■Bearing and Distance measurement
DUsing the EBL and VRM
3/4 NM CURS |
| TVECT 3M |
3240R | 1141NM | |
SOG 00km/h | H UP | HDG |
IR
EBL1
VRM1
EBL2
VRM2 
EBL1 |
|
|
|
|
readout |
|
|
| VRM1 readout |
EBL2 | EBL1 | 3151˚T | VRM1 0503NM | |
WPT | 34 | VRM2 0359NM | VRM2 readout | |
| EBL2 | 2471˚T |
| |
readout | POSN |
|
|
|
This radar has 2 Electronic Bearing Lines (EBL) to in- dicate the target direction from your ship or a target.
qPush [Ù Ú Ω ≈] to move the cursor on the desired target.
wPush [EBL1 (VRM1)]/[
] to display the EBL1 and VRM1.
•Push [Ω ≈] to rotate the electronic bearing line.
•Push [≈] to rotate clockwise and push [Ω] to rotate counterclockwise.
•Push [Ù Ú] to increase or decrease the variable range marker ring size.
•The EBL1 and VRM1 readouts indicate the target bear- ing and distance.
•The EBL readouts indicate the target bearing;
0 to 360°R : Relative direction, when ‘360°R’ is se- lected in the EBL/PI of the FUNCTION menu. (see p. 6)
P/S 0 to 180° : Bow direction, when ‘PT/SB’ is selected in the EBL/PI of the FUNCTION menu. (see p. 6)
0 to 360°T* : True or magnetic bearing, when select- ing ‘TRUE’ in the EBL/PI of the FUNC- TION menu. (see p. 6)
*Bearing data is required. (p. 39)
ePush [EBL1 (VRM1)]/[ 
] to clear the
EBL1 and VRM1.
•Cursor remains on the display.
rPush [Ù Ú Ω ≈] to move the cursor on the desired target.
tPush [EBL2 (VRM2)]/[
] to display the EBL2 and VRM2 on the display.
•When the EBL1 and VRM1 are displayed, the beginning of EBL2 and VRM2 appears at the intersection point of the EBL1 and VRM1.
•The EBL2 and VRM2 disappears when [EBL1 (VRM1)]
/[ 
]is pushed.
yTo clear the EBL1 and VRM1, push [EBL1 (VRM1)]
/[
].
15