Icom MR-1000TTM, MR-1000RTM, EX-2714 instruction manual Rine Radar, Word Definition

Page 3

FOREWORD

Thank you for purchasing Icom’s MR-1000RII/TII MA-

RINE RADAR.

The radar is designed especially for fishing boats. It has powerful transmission power, 10 inch CRT display and many other advanced features.

If you have any questions regarding the operation of the radar, contact your nearest authorized Icom Inc. dealer.

IMPORTANT

READ ALL INSTRUCTIONS carefully and com- pletely before attempting to operate the marine radar.

SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating in- structions for the MR-1000RII/TII.

EXPLICIT DEFINITIONS

The following explicit definitions apply to this instruc- tion manual.

WORD

DEFINITION

RWARNING Personal injury, fire hazard or electric shock may occur.

CAUTION Equipment damage may occur.

NOTE

If disregarded, inconvenience only.

No risk of personal injury, fire or

 

electric shock.

PRECAUTION

RNEVER let metal, wire or other objects touch any internal part of the radar.

RNEVER place the radar within the reach of chil- dren.

RNEVER expose the display unit to rain, salt water or any other liquids.

NEVER connect the radar to AC or more than 42 V DC. This will damage the radar.

AVOID using the radar near any magnetic materials, such as a loudspeaker or a large power transformer, as this can cause distortion of the CRT display.

AVOID placing the display unit in excessively dusty en- vironments.

AVOID placing the display unit near heating equipment or in direct sunlight or where hot or cold air blows di- rectly onto it.

AVOID using the scanner unit in areas where the tem- perature is below –25˚C (–13˚F) or above +70˚C (+158˚F). AVOID using the display unit in areas where the temperature is below –15˚C (+5˚F) or above +55˚C (+131˚F).

AVOID using strong solvents such as benzene or al- cohol for cleaning the radar, as they may damage the surfaces.

BE CAREFUL!

SART signal may not be detected and may not be displayed on the screen depending on the SEA, RAIN or IR settings.

Follow the settings as below to detect the SART signal on the screen.

qSelect the screen range between 6 NM to 12 NM with [+/–]. (p. 2)

wSet the [GAIN] as high as possible. (p. 3) e Set the [SEA] to minimum. (p. 3)

r Set the [RAIN] to minimum. (p. 3) t Turn the [IR] OFF.

y Turn the [STRETCH] OFF.

ii

Image 3
Contents MR-1000R SX-2713/277910 inch CRT display unit Model Name CRT Display Scanner UnitEX-2714Radome type unit Qty System cable OPC-1188 15 m EX-2780Open array type unit QtyWord Definition Rine RadarTable of Contents Radiation Hazard Front panel Panel Description2HEADING Line OFF Function HL OFF 9EBL1 VRM1 Switch EBL1 VRM1@0DISPLAY Brilliance Switch Brill 0PARALLEL Index Line Function PIScreen @9MODE Indicator6TIME Indicator %7TIME Indicator #9CURSOR Indicator$3HEADING Indicator $8OWN Ship Vector IndicatorMenu ATA Automatic Tracking Aid Basic Operation Checking the installationTurning power ON/OFF ChecklistBasic operation Rain function SEA functionOFF Center function Zoom function expands the target to two times normal size IR functionStretch function Zoom functionTrails function Power save functionWaypoint indication Bearing settingShip speed indication Position indicationDistance measurement Using the fixed ringsUsing the variable range marker Distance and Direction MeasurementsPush EBL1 VRM1/ to clear EBL1 and VRM1 Using the EBL and VRMBearing and Distance measurement Distance and Direction MeasurementsPush Ù Ú Ω ≈ to move the cursor on the other target Advanced measurementsMeasuring the distance and direction between 2 targets Push EBL2 VRM2/ to display the EBL2 and VRM2Setting and using the alarm function Alarm FunctionAlarm zone setting Zone alarm settingATA Automatic Tracking Aid ATA menu settingATA operation Plotting marks Course and speed vectorATA Automatic Tracking Aid ATA PlotsBasic Radar Theory Side-lobe echoesIndirect echoes Multiple echoes Minimum rangeBasic Radar Theory Blind and Shadow sectors Target resolutionDistance resolution Direction resolutionGround connection Installation and ConnectionsConnecting the units Power source requirementInstalling the display unit Ship’s bow direction Mounting the EX-2714 scanner unitWiring the EX-2714 system cable Scanner unit disassemblyConnect the system cable Mounting the EX-2780 scanner unit Wiring the EX-2780 system cable Beacon Fixing the EX-2780 scanner unitTest pattern indication All resetOther Functions Antenna rotation speedService MAN Menu Service man menuSelect the language Timing adjustment HDG adjustmentService MAN Menu Range selection SPD adjustmentError Message Error message listMessage Condition Display unit maintenance MaintenancePeriodic maintenance Scanner unit maintenanceSpecifications EX-2714 RadomeEX-2780 Open array Display unit SpecificationsBearing Speed Position External Data ListSX-2713/2779 Display mounting bracket template EX-2714 Radome template EX-2780 Open array type template