Furuno GP32 manual Menu Overview, How to enter alphanumeric data, Off, Auto

Page 17

1.5 Menu Overview

Most operations of your unit are carried out through the menu. Below is a quick introduction to how to choose a menu and change menu settings. If you get lost in operation, press the [MENU] key to return to the MAIN MENU. For your reference, a complete menu tree appears in the Appendix.

1.Press the [MENU] key once or twice to display the menu.

One press: Steering display, nav data display and user display.

Two presses: Plotter display, highway display.

MAIN MENU

WAYPOINTS		MESSAGES
ROUTES		SATELLITE
PLOTTER		USER DISP
ALARMS		GPS SETUP
ERASE		SYS SETUP
WAAS/DGPS		I/O SETUP
CALCULATE		TD SETUP

Main menu

2.Operate the cursor pad to choose a menu and then press the [ENT] key. For example, choose PLOTTER and then press the [ENT] key.

PLOTTER SETUP

TRACK REC	:	DISTANCE
INTERVAL	: 0.10 nm
BRG. REF.	: MAG
MAG. VAR.	: AUTO E16
WPT NAME	: DSP GOTO
TTG/ETA SPD		: AUTO

TRACK MEMORY USED 1%

PLOTTER SETUP menu

3.Use ▲ or ▼ to choose menu item. For example, choose TRACK REC.

4.Press the [ENT] key. A window shows the options for the item selected. (The illustration at the top of the next shows the options available for TRACK REC.)

1. OPERATIONAL OVERVIEW

OFF

DISTANCE

AUTO

Track recording options

5.Press ▲ or ▼ to choose option desired.

6.Press the [ENT] key to register your selection.

7.Press the [MENU] key twice to close the menu.

How to enter alphanumeric data

In some instances it is necessary to enter alphanumeric data. The example below shows how to enter a time difference of -6:30, to use local time instead of UTC time.

1.Press the [MENU] key once or twice to display the menu.

2.Choose SYS SETUP and then press the [ENT] key.

			SYSTEM SETUP
LANGUAGE :
				ENGLISH
DATUM			: WGS84
UNITS			: nm, kt
TIME DIFF			: +00 : 00
TIME DISP			: 24HOUR
TEST?

SIMULATOR?

EXCHANGE BATTERY?

SYSTEM SETUP menu

3.Choose TIME DIFF.

4.Press the [ENT] key. A cursor circumscribes “+”. This cursor appears whenever selected data can be changed with the cursor pad.

SYSTEM SETUP

LANGUAGE : ENGLISH

DATUM	: WGS84
UNITS	: nm, kt
TIME DIFF	: +00 : 00
TIME DISP	: 24HOUR
TEST?

SIMULATOR?

EXCHANGE BATTERY?

SYSTEM SETUP menu,

TIME DIFF selected

7

Image 17

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Word to the Owner of the GP-37, GP-32 FeaturesForeword GP-32 system configuration System ConfigurationGP-37 system configuration Msas Egnos Waas What is WAAS?Standard supply Equipment ListsOptional equipment Name Type Code No Qty RemarksOperational Overview How to attach and remove the hard coverControls Control panelAdjusting Brilliance and Contrast Turning On and Off PowerTurning on the power Turning off the powerDisplay Modes Display modes default user displaysHighway display Plotter displayPlotter display Highway displayNav data display Steering displaySteering display Nav data displayUser displays Digital display default displayDigital display Speedometer displayMenu Overview How to enter alphanumeric dataOFF AutoSimulator display, auto course selected Simulation DisplaySimulator menu Choosing the Display Range Plotter Display OverviewShifting the Cursor Cursor state and dataCentering Own Ship’s Position Shifting the DisplayChanging Track Plotting Interval, Stopping Plotting OFFErase menu Erasing TrackErase Track YESPlotter Display Overview This page intentionally left blank Entering a waypoint with the cursor Waypoints MarksEntering Waypoints Entering a waypoint from the waypoint list Entering a waypoint at own ship positionWPTS/MARKS List GPS POS. → MarkEnter a NEW WPT Name Entering the MOB MarkMark Saved to MOB GO to MOB ?Operations on the Waypoint List Displaying Waypoint NameDSP RTE DSP ALL Editing waypointsShowing nearest waypoints by distance, TTG and ETA Erasing WaypointsWPTS/MARKS Nearest Name KobeSpeed for Calculating Time-to-Go, Estimated Time of Arrival Creating Routes RoutesCreating a route with the cursor Sample routeCreating a route from the route menu RoutesWPTS/MARKS List Creating a route from the waypoint listRoutes Creating a track-based route manually Creating a track-based routeCreating a track-based route automatically DistanceReplacing waypoints in a route Editing RoutesREMOVE? INSERT? SKIP? NamePermanently deleting a waypoint from a route Route contents Route-01Inserting a waypoint in a route Temporarily deselecting a waypoint in a routeChanging route comment name Erasing RoutesErase Route 01 ? YESThis page intentionally left blank Setting Destination by Waypoint Setting Destination by CursorWPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? DestinationSetting User Waypoint as Destination Setting Route as DestinationCanceling Destination REVERSE?Arrival Alarm, Anchor Watch Alarm AlarmsArrival alarm AlarmsARV ANC XTE Cross Track Error AlarmAnchor watch alarm WAAS/DGPS Alarm Speed AlarmTime Alarm WAAS/DGPS mode and alarm messageOdometer Alarm Trip AlarmBuzzer Type Selection Long ConstantCalculating Range, Bearing, TTG and ETA Other FunctionsRange and bearing between two waypoints RouteGPS Waas SetupWaas INT Beacon EXT BeaconGPS Dgps setupEditing Dgps user channels Programming Dgps user channels stationsStation Nearest Station UserErasing all user channels Bearing ReferenceTrue Erasing individual user channelsUnits of Measurement Geodetic Chart SystemMagnetic Variation Position Display Format Time Difference using local time, Time FormatFor Loran C TD For Decca TDGPS Setup menu description GPS SetupSpeedometer User Display SetupDigital data Reset Trip METER? Are YOU SURE? YES no ODOMETER? Resetting Trip and Odometer DistancesReset trip meter, odometer options Speedometer displaySetting for communication software on WiringUploading, Downloading Waypoint, Route Data Downloading/Uploading between PC and GP-37/GP-32Loading data from a Yeoman Uploading data from a PCRoute data format Waypoint data formatRoute comment data format LanguageEnd of sentence EspanolMaintenance Maintenance & TroubleshootingDisplaying the Message Board MessagesExchange BATTERY? Replacing the BatteryReady for Battery Change Press ANY KEY To Shut Down Replacing the FuseSatellite Monitor Display DiagnosticsSatellite monitor display Test START? promptClearing Data Language Default Position Unit Time Difference Language and default position, unit and time differenceThis page intentionally left blank Installation of Display Unit InstallationMounting considerations Desktop and overhead mountingHow to assemble the connector Installation of Antenna UnitFlush mount S kit Flush mount S kit Type OP20-17 Code NoWiring WiringHow to fix spring in fuse holder GroundingOutput data format, data sentences Initial SettingsDATA1 Current loop data DATA2 RS-232C levelDATA1, Data 2 and Nmea version options Output settingSetup menu This page intentionally left blank Menu Tree AppendixAvailable data Odometer, trip , time Digital Display divisionStart from -99 to +99 Interval 01 to 99North American Geodetic Chart ListGRI Loran C ChainsChain Location Code Decca ChainsAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE IndexIndex-2