Furuno GP32 Position Display Format, Time Difference using local time, Time Format, For Decca TD

Page 49

7.8 Position Display Format

Position may shown in latitude and longitude or TDs (Loran C or Decca) as follows. Decca and Loran C chain data is preprogrammed.

1.Press the [MENU] key once or twice to open the menu.

2.Choose TD SETUP and then press the [ENT] key.

		TD SETUP
DISPLAY :		XX.XXX'
LORAN C :		7980: 23-43
∆ TD1 :		+00 . 0

∆TD2 : +00 . 0

DECCA	:	25: G-P
∆ TD1	:	+00 . 0

∆TD2 : +00 . 0

TD SETUP menu

3.The cursor is on the first line. Press the [ENT] key.

XX.XXX'

XX'XX.X"

LC TD

DE TD

Position display options 4. Choose desired position format.

XX.XXX’: Shows L/L position with no seconds.

XX’XX.X’: Displays L/L position with seconds.

LC TD: Loran C TDs

DE TE: Decca TDs

5.Press the [ENT] key. If you selected a latitude and longitude format, go to step 7.

6.For Loran C or Decca, do one of the following and then go to step 7.

For Loran C TD:

a)The cursor is on LORAN C. Press the [ENT] key.

b)Use the cursor pad to choose appropriate GRI code and secondary codes, referring to the Loran C chain list on page AP-4.

c)Press the [ENT] key.

7.OTHER FUNCTIONS

d)If necessary enter TD offsets at ∆TD1 and ∆TD2 to refine position accuracy.

For Decca TD:

a)Choose DECCA and then press the [ENT] key.

b)Use the cursor pad to choose appropriate Decca chain number and lane pair (R, Red, G, Green, P, Purple), referring to the Decca chain list on page AP-5.

c)Press the [ENT] key.

d)If necessary enter TD offsets at ∆TD1 and ∆TD2 to refine position accuracy.

7.Press the [MENU] key twice to finish.

7.9Time Difference (using local time), Time Format

GPS uses UTC time. If you would rather use local time, enter the time difference (range: -13:30 to +13:30) between it and UTC time.

You may display the time in 12 or 24 hour format.

1.Press the [MENU] key once or twice to open the menu.

2.Choose SYS SETUP and then press the [ENT] key.

3.Press ▼ to choose TIME DIFF and then press the [ENT] key.

4.Press ▲ or ▼ to display “+” or “-“ as appropriate.

5.Enter time difference with the cursor pad.

6.Press the [ENT] key.

7.The cursor is selecting TIME DISP. Press the [ENT] key.

8.Choose 12 HOUR or 24 HOUR as appropriate and then press the [ENT] key.

9.Press the [MENU] key twice to finish.

39

Image 49

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Foreword FeaturesWord to the Owner of the GP-37, GP-32 GP-37 system configuration System ConfigurationGP-32 system configuration Msas Egnos Waas What is WAAS?Standard supply Equipment ListsOptional equipment Name Type Code No Qty RemarksOperational Overview How to attach and remove the hard coverControls Control panelAdjusting Brilliance and Contrast Turning On and Off PowerTurning on the power Turning off the powerDisplay Modes Display modes default user displaysHighway display Plotter displayPlotter display Highway displayNav data display Steering displaySteering display Nav data displayUser displays Digital display default displayDigital display Speedometer displayMenu Overview How to enter alphanumeric dataOFF AutoSimulator menu Simulation DisplaySimulator display, auto course selected Choosing the Display Range Plotter Display OverviewShifting the Cursor Cursor state and dataCentering Own Ship’s Position Shifting the DisplayChanging Track Plotting Interval, Stopping Plotting OFFErase menu Erasing TrackErase Track YESPlotter Display Overview This page intentionally left blank Entering Waypoints Waypoints MarksEntering a waypoint with the cursor Entering a waypoint from the waypoint list Entering a waypoint at own ship positionWPTS/MARKS List GPS POS. → MarkEnter a NEW WPT Name Entering the MOB MarkMark Saved to MOB GO to MOB ?Operations on the Waypoint List Displaying Waypoint NameDSP RTE DSP ALL Editing waypointsShowing nearest waypoints by distance, TTG and ETA Erasing WaypointsWPTS/MARKS Nearest Name KobeSpeed for Calculating Time-to-Go, Estimated Time of Arrival Creating Routes RoutesCreating a route with the cursor Sample routeCreating a route from the route menu RoutesRoutes Creating a route from the waypoint listWPTS/MARKS List Creating a track-based route manually Creating a track-based routeCreating a track-based route automatically DistanceReplacing waypoints in a route Editing RoutesREMOVE? INSERT? SKIP? NamePermanently deleting a waypoint from a route Route contents Route-01Inserting a waypoint in a route Temporarily deselecting a waypoint in a routeChanging route comment name Erasing RoutesErase Route 01 ? YESThis page intentionally left blank Setting Destination by Waypoint Setting Destination by CursorWPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? DestinationSetting User Waypoint as Destination Setting Route as DestinationCanceling Destination REVERSE?Arrival Alarm, Anchor Watch Alarm AlarmsArrival alarm AlarmsAnchor watch alarm XTE Cross Track Error AlarmARV ANC WAAS/DGPS Alarm Speed AlarmTime Alarm WAAS/DGPS mode and alarm messageOdometer Alarm Trip AlarmBuzzer Type Selection Long ConstantCalculating Range, Bearing, TTG and ETA Other FunctionsRange and bearing between two waypoints RouteGPS Waas SetupWaas INT Beacon EXT BeaconGPS Dgps setup Editing Dgps user channels Programming Dgps user channels stations Station Nearest Station UserErasing all user channels Bearing ReferenceTrue Erasing individual user channelsMagnetic Variation Geodetic Chart SystemUnits of Measurement Position Display Format Time Difference using local time, Time FormatFor Loran C TD For Decca TDGPS Setup menu description GPS SetupDigital data User Display SetupSpeedometer Reset Trip METER? Are YOU SURE? YES no ODOMETER? Resetting Trip and Odometer DistancesReset trip meter, odometer options Speedometer displaySetting for communication software on WiringUploading, Downloading Waypoint, Route Data Downloading/Uploading between PC and GP-37/GP-32Loading data from a Yeoman Uploading data from a PCRoute data format Waypoint data formatRoute comment data format LanguageEnd of sentence EspanolMaintenance Maintenance & TroubleshootingDisplaying the Message Board MessagesExchange BATTERY? Replacing the BatteryReady for Battery Change Press ANY KEY To Shut Down Replacing the FuseSatellite Monitor Display DiagnosticsSatellite monitor display Test START? promptClearing Data Language Default Position Unit Time Difference Language and default position, unit and time differenceThis page intentionally left blank Installation of Display Unit InstallationMounting considerations Desktop and overhead mountingHow to assemble the connector Installation of Antenna UnitFlush mount S kit Flush mount S kit Type OP20-17 Code NoWiring WiringHow to fix spring in fuse holder GroundingOutput data format, data sentences Initial SettingsDATA1 Current loop data DATA2 RS-232C levelSetup menu Output settingDATA1, Data 2 and Nmea version options This page intentionally left blank Menu Tree AppendixAvailable data Odometer, trip , time Digital Display divisionStart from -99 to +99 Interval 01 to 99North American Geodetic Chart ListGRI Loran C ChainsChain Location Code Decca ChainsAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE IndexIndex-2