Furuno GP32 manual Waypoint data format, Route data format

4. Press the [ENT] key.

LOADING START? (YEOMAN READY?)

ARE YOU SURE?

YES NO

LOADING START? prompt

5.Set up the YEOMAN to output data.

6.Press ◄ to choose YES and then press the [ENT] key to load data.

WAYPOINTS	Now loading
	data
LOADING....
END?	To quit loading,
	press the [ENT] key.

Message when waypoints are being loaded

7.Data is loaded to empty location and the buzzer sounds twice to signify successful loading. If there is not enough memory free to store the waypoints, the message below appears.

WAYPOINTS FULL

FULLNOT LOADING

HIT ANY KEY.

Message when waypoints

could not be loaded

Waypoint data format

$PFEC, GPwpl, llll.lll,	a,	yyyyy.yyy,	a, c	----	c, c, c		----	c, a,		hhmmss,	xx, xx, xxxx <CR><LF>
1	2	3	4	5		6	7		8	9	10 11 12

Waypoint data format

1: Waypoint latitude

2: N/S

3: Waypoint longitude

4: E/W

5: Waypoint name (Number of characters is fixed to 6 and space code is placed when the number of characters are less than 6.)

6: Waypoint color (This field is always kept NULL.)

7. OTHER FUNCTIONS

7: Waypoint comment (2 byte for mark code + 16 characters of comment.)

1st byte of mark code: Fixed to '@'.

2nd byte of mark code: Internal mark code + 'a' (0 x 61). See Note 1 on the next page.

Number of characters for comment is less than 16 (variable length). See Note 2 on the next page.

8: Flag making waypoint. Always set to “A”. “A”: Displayed

”V”: Not displayed

9: UTC (Always NULL)

10: Day (Always NULL)

11: Month (Always NULL)

12: Year (Always NULL)

Note 1: Internal mark code is 0 x 10 through 0 x 18. 0 x 71 through 0 x 79 are always placed at 2nd byte of mark code.

Note 2: Following characters can be used for comments:

_ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789&()+-/=?}

0x10: (q) 0x11: (r) 0x12: (s) 0x13: (t) 0x14: (u)

0x15: (v) 0x16: (w) 0x17: (x) 0x18: (y)

Characters available for comments

Route data format

$GPRTE, x, x, a, cc, c					----	c, c----		c, ... , c c <CR><LF>----
	1	2	3	4	5		6		12

Route data format

1: Number of sentences required for one complete route data (1 to 4). See Note.

2: Number of sentences currently used (1 to

4)

3: Message mode (Always set to C).

4: Route No. (01 to 51 (51 is LOG route, 2 digits required)

5 through 12: Waypoint name (Max. 8 names, length of each waypoint name is fixed to 7 byte)

45