Furuno GP32 manual Other Functions, Calculating Range, Bearing, TTG and ETA, Route, Man

Page 43

7. OTHER FUNCTIONS

7.1Calculating Range, Bearing, TTG and ETA

Range and bearing between two waypoints

1.Press the [MENU] key once or twice to open the menu.

2.Choose CALCULATE and then press the [ENT] key.

CALCULATION

MODE : WAYPOINTS

FROM : _ _ _ _ _ _

TO : _ _ _ _ _ _

SPD : AUTO

TTG: _ _H_ _M	ETA: _ _:_ _
RNG: _ ._ _ nm	BRG: _ _ _°

CALCULATION menu

3.The cursor is selecting MODE. Press the [ENT] key.

WAYPOINTS

ROUTE

Range and bearing calculation options

4.Choose WAYPOINTS and then press the [ENT] key.

5.Press the [ENT] key.

6.Enter the FROM waypoint and then press the [ENT] key.

7.Press the [ENT] key, enter the TO waypoint and then press the [ENT] key.

8.Press the [ENT] key to display the speed input options.

AUTO

MAN

Speed input options

9.Choose AUTO or MAN and then press the [ENT] key. AUTO uses ship’s average speed; MAN is for manual entry of speed. For AUTO, see the illustration after step 10 for sample range and bearing calculation. For MAN, go to step 10.

10.Press the [ENT] key. Enter speed with the cursor pad and then press the [ENT] key.

The illustration below shows what the display might look like using waypoints KOBE and OSAKA as the FROM and TO waypoints, respectively.

Time-to-Go

Estimated Time of Arrival

CALCULATION

MODE : WAYPOINTS

FROM : KOBE

TO : OSAKA

SPD : AUTO

TTG: 1H39M ETA: 5:57

RNG: 9.06 nm BRG: 80°

Range Bearing

Typical range and bearing calculation

between two waypoints

11. Press the [MENU] key twice to finish.

Range, TTG and ETA between first and final waypoints of a route

You can easily find the range, TTG and ETA between the first and final waypoints of a route as follows:

1.Press the [MENU] key once or twice to open the menu.

2.Choose CALCULATE and then press the [ENT] key.

3.Press the [ENT] key.

4.Choose ROUTE and then press the [ENT] key.

5.Press the [ENT] key.

6.Choose route number from the route list with the cursor pad.

7.Press the [ENT] key to open the speed input options window.

8.Choose AUTO or MAN. AUTO uses ship’s average speed; MAN is for manual entry of speed.

33

Image 43

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Foreword FeaturesWord to the Owner of the GP-37, GP-32 GP-37 system configuration System ConfigurationGP-32 system configuration Msas Egnos Waas What is WAAS?Name Type Code No Qty Remarks Equipment ListsStandard supply Optional equipmentControl panel How to attach and remove the hard coverOperational Overview ControlsTurning off the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning on the powerDisplay Modes Display modes default user displaysHighway display Plotter displayHighway display Plotter displayNav data display Steering displayNav data display Steering displaySpeedometer display Digital display default displayUser displays Digital displayAuto How to enter alphanumeric dataMenu Overview OFFSimulator menu Simulation DisplaySimulator display, auto course selected Cursor state and data Plotter Display OverviewChoosing the Display Range Shifting the CursorOFF Shifting the DisplayCentering Own Ship’s Position Changing Track Plotting Interval, Stopping PlottingYES Erasing TrackErase menu Erase TrackPlotter Display Overview This page intentionally left blank Entering Waypoints Waypoints MarksEntering a waypoint with the cursor GPS POS. → Mark Entering a waypoint at own ship positionEntering a waypoint from the waypoint list WPTS/MARKS ListSaved to MOB GO to MOB ? Entering the MOB MarkEnter a NEW WPT Name MarkEditing waypoints Displaying Waypoint NameOperations on the Waypoint List DSP RTE DSP ALLName Kobe Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA WPTS/MARKS NearestSpeed for Calculating Time-to-Go, Estimated Time of Arrival Sample route RoutesCreating Routes Creating a route with the cursorCreating a route from the route menu RoutesRoutes Creating a route from the waypoint listWPTS/MARKS List Distance Creating a track-based routeCreating a track-based route manually Creating a track-based route automaticallyName Editing RoutesReplacing waypoints in a route REMOVE? INSERT? SKIP?Temporarily deselecting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Inserting a waypoint in a routeYES Erasing RoutesChanging route comment name Erase Route 01 ?This page intentionally left blank Destination Setting Destination by CursorSetting Destination by Waypoint WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP?REVERSE? Setting Route as DestinationSetting User Waypoint as Destination Canceling DestinationAlarms AlarmsArrival Alarm, Anchor Watch Alarm Arrival alarm Anchor watch alarm XTE Cross Track Error Alarm ARV ANC WAAS/DGPS mode and alarm message Speed AlarmWAAS/DGPS Alarm Time AlarmLong Constant Trip AlarmOdometer Alarm Buzzer Type SelectionRoute Other FunctionsCalculating Range, Bearing, TTG and ETA Range and bearing between two waypointsEXT Beacon Waas SetupGPS Waas INT BeaconGPS Dgps setupStation User Programming Dgps user channels stationsEditing Dgps user channels Station NearestErasing individual user channels Bearing ReferenceErasing all user channels TrueMagnetic Variation Geodetic Chart SystemUnits of Measurement For Decca TD Time Difference using local time, Time FormatPosition Display Format For Loran C TDGPS Setup menu description GPS SetupDigital data User Display SetupSpeedometer Speedometer display Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Reset trip meter, odometer optionsDownloading/Uploading between PC and GP-37/GP-32 WiringSetting for communication software on Uploading, Downloading Waypoint, Route DataLoading data from a Yeoman Uploading data from a PCRoute data format Waypoint data formatEspanol LanguageRoute comment data format End of sentenceMessages Maintenance & TroubleshootingMaintenance Displaying the Message BoardReplacing the Fuse Replacing the BatteryExchange BATTERY? Ready for Battery Change Press ANY KEY To Shut DownTest START? prompt DiagnosticsSatellite Monitor Display Satellite monitor displayClearing Data Language Default Position Unit Time Difference Language and default position, unit and time differenceThis page intentionally left blank Desktop and overhead mounting InstallationInstallation of Display Unit Mounting considerationsFlush mount S kit Type OP20-17 Code No Installation of Antenna UnitHow to assemble the connector Flush mount S kitGrounding WiringWiring How to fix spring in fuse holderDATA2 RS-232C level Initial SettingsOutput data format, data sentences DATA1 Current loop dataSetup menu Output settingDATA1, Data 2 and Nmea version options This page intentionally left blank Menu Tree AppendixInterval 01 to 99 Digital Display divisionAvailable data Odometer, trip , time Start from -99 to +99North American Geodetic Chart ListGRI Loran C ChainsChain Location Code Decca ChainsAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE IndexIndex-2