Furuno GP32 Bearing Reference, Erasing all user channels, True, Erasing individual user channels

Page 47

6.Choose a station from the list and then press the [ENT] key. The display looks something like the one below.

FREQ	:	310.0kHz
RATE	:	200BPS
LAT	:	37° 59'N
LON	:	123° 00'W
EXIT?	SAVE?	ERASE?

Screen for entering DGPS station data

7.Choose item, press the [ENT] key, edit data, and then press the [ENT] key.

8.Choose “SAVE?” and then press the [ENT] key.

9.Press the [MENU] key twice to finish.

7. OTHER FUNCTIONS

Erasing individual user channels

1.Press the [MENU] key twice to open the menu.

2.Choose DGPS/WAAS and then press the [ENT] key.

3.Choose DGPS STATION and then press the [ENT] key.

4.Choose LIST and then press the [ENT] key.

5.Choose USER and then press the [ENT] key.

6.Choose a channel from the list and then press the [ENT] key.

7.Choose “ERASE?”.

8.Choose YES and then press the [ENT] key.

9.Press the [MENU] key twice to finish.

Erasing all user channels

1.Press the [MENU] key twice to open the menu.

2.Choose DGPS/WAAS and then press the [ENT] key.

3.Choose DGPS STATION and then press the [ENT] key.

4.Choose LIST and then press the [ENT] key.

5.Choose USER and then press the [ENT] key.

6.Choose “CLR?” and then press the [ENT] key. The following message appears.

ERASE ALL ?

ARE YOU SURE ?

YES	NO

DGPS channel erase options

7.Press ◄ to choose YES and then press the [ENT] key.

8.Press the [MENU] key twice to finish.

7.4 Bearing Reference

Ship's course and bearing to a waypoint may be displayed in true or magnetic bearing. Magnetic bearing is true bearing plus (or minus) earth’s magnetic deviation. Use the bearing reference in accordance with the compass interfaced: magnetic for magnetic compass, true for gyrocompass. The default setting displays magnetic bearings.

1.Press the [MENU] key once or twice to open the menu.

2.Choose PLOTTER.

3.Press the [ENT] key.

4.Choose BRG. REF.

5.Press the [ENT] key.

MAG

TRUE

Bearing reference options

6.Choose MAG or TRUE as appropriate.

7.Press the [ENT] key.

8.Press the [MENU] key twice to finish.

37

Image 47

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Word to the Owner of the GP-37, GP-32 FeaturesForeword GP-32 system configuration System ConfigurationGP-37 system configuration Msas Egnos Waas What is WAAS?Name Type Code No Qty Remarks Equipment ListsStandard supply Optional equipmentControl panel How to attach and remove the hard coverOperational Overview ControlsTurning off the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning on the powerDisplay Modes Display modes default user displaysHighway display Plotter displayHighway display Plotter displayNav data display Steering displayNav data display Steering displaySpeedometer display Digital display default displayUser displays Digital displayAuto How to enter alphanumeric dataMenu Overview OFFSimulator display, auto course selected Simulation DisplaySimulator menu Cursor state and data Plotter Display OverviewChoosing the Display Range Shifting the CursorOFF Shifting the DisplayCentering Own Ship’s Position Changing Track Plotting Interval, Stopping PlottingYES Erasing TrackErase menu Erase TrackPlotter Display Overview This page intentionally left blank Entering a waypoint with the cursor Waypoints MarksEntering Waypoints GPS POS. → Mark Entering a waypoint at own ship positionEntering a waypoint from the waypoint list WPTS/MARKS ListSaved to MOB GO to MOB ? Entering the MOB MarkEnter a NEW WPT Name MarkEditing waypoints Displaying Waypoint NameOperations on the Waypoint List DSP RTE DSP ALLName Kobe Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA WPTS/MARKS NearestSpeed for Calculating Time-to-Go, Estimated Time of Arrival Sample route RoutesCreating Routes Creating a route with the cursorCreating a route from the route menu RoutesWPTS/MARKS List Creating a route from the waypoint listRoutes Distance Creating a track-based routeCreating a track-based route manually Creating a track-based route automaticallyName Editing RoutesReplacing waypoints in a route REMOVE? INSERT? SKIP?Temporarily deselecting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Inserting a waypoint in a routeYES Erasing RoutesChanging route comment name Erase Route 01 ?This page intentionally left blank Destination Setting Destination by CursorSetting Destination by Waypoint WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP?REVERSE? Setting Route as DestinationSetting User Waypoint as Destination Canceling DestinationAlarms AlarmsArrival Alarm, Anchor Watch Alarm Arrival alarmARV ANC XTE Cross Track Error AlarmAnchor watch alarm WAAS/DGPS mode and alarm message Speed AlarmWAAS/DGPS Alarm Time AlarmLong Constant Trip AlarmOdometer Alarm Buzzer Type SelectionRoute Other FunctionsCalculating Range, Bearing, TTG and ETA Range and bearing between two waypointsEXT Beacon Waas SetupGPS Waas INT BeaconGPS Dgps setupStation User Programming Dgps user channels stationsEditing Dgps user channels Station NearestErasing individual user channels Bearing ReferenceErasing all user channels TrueUnits of Measurement Geodetic Chart SystemMagnetic Variation For Decca TD Time Difference using local time, Time FormatPosition Display Format For Loran C TDGPS Setup menu description GPS SetupSpeedometer User Display SetupDigital data Speedometer display Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Reset trip meter, odometer optionsDownloading/Uploading between PC and GP-37/GP-32 WiringSetting for communication software on Uploading, Downloading Waypoint, Route DataLoading data from a Yeoman Uploading data from a PCRoute data format Waypoint data formatEspanol LanguageRoute comment data format End of sentenceMessages Maintenance & TroubleshootingMaintenance Displaying the Message BoardReplacing the Fuse Replacing the BatteryExchange BATTERY? Ready for Battery Change Press ANY KEY To Shut DownTest START? prompt DiagnosticsSatellite Monitor Display Satellite monitor displayClearing Data Language Default Position Unit Time Difference Language and default position, unit and time differenceThis page intentionally left blank Desktop and overhead mounting InstallationInstallation of Display Unit Mounting considerationsFlush mount S kit Type OP20-17 Code No Installation of Antenna UnitHow to assemble the connector Flush mount S kitGrounding WiringWiring How to fix spring in fuse holderDATA2 RS-232C level Initial SettingsOutput data format, data sentences DATA1 Current loop dataDATA1, Data 2 and Nmea version options Output settingSetup menu This page intentionally left blank Menu Tree AppendixInterval 01 to 99 Digital Display divisionAvailable data Odometer, trip , time Start from -99 to +99North American Geodetic Chart ListGRI Loran C ChainsChain Location Code Decca ChainsAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE IndexIndex-2