Furuno GP32 manual Waas Setup, Gps, Waas INT Beacon, EXT Beacon, Manual

Page 44

7. OTHER FUNCTIONS

9.Press the [ENT] key. If you selected AUTO no further operation is necessary. See the illustration below for a calculation example. For MAN, press the [ENT] key, enter speed with the cursor pad and then press the [ENT] key.

The illustration below shows what the display might look like using Route-01 as an example.

Time-to-Go

Estimated Time of Arrival

CALCULATION

MODE : ROUTE

NO. : 01 (WPTS: 4)

KOBE → OSAKA

SPD : AUTO

TTG: 1H55M ETA: 07:17

RNG: 11.25 nm BRG: _ _ _°

Range

Typical TTG, ETA, range calculation for route

10. Press the [MENU] key twice to finish.

7.2 WAAS Setup

1.Press the [MENU] key once or twice to open the menu.

2.Choose WAAS/DGPS and then press the [ENT] key.

WAAS/DGPS SETUP

MODE	:	AUTO
WAAS SEARCH:		AUTO	120
CORRECTIONS DATA SET:			02
DGPS STATION: AUTO
RATE	: 200BPS
FREQ	: 310.0 kHz
STATION : GOOD DATA: GOOD
SIG.S: 55.2 dB		SNR: 22.0dB

WAAS/DGPS SETUP menu

3.The cursor is selecting MODE; press the [ENT] key.

	GPS						GPS position fixing


	WAAS
	INT BEACON							DGPS position fixing
	INT BEACON
	EXT BEACON



	AUTO

WAAS/DGPS mode options

4.Choose appropriate mode referring to the descriptions below. Press the [ENT] key. WAAS: Position fix by WAAS

AUTO: Position fix in priority order of DGPS, WAAS, and GPS.

5.Press the [ENT] key.

6.WAAS SEARCH is selected; press the [ENT] key.

AUTO

MANUAL

WAAS search options

7.Choose AUTO for automatic search or MANUAL for manual search and then press the [ENT] key. For MANUAL, press the [ENT] key, enter appropriate WAAS satellite number, referring to the illustration below and then press the [ENT] key.

AUTO mode and GEO satellite

(as of April 2002)

Provider

GEO Satellite

Longitude

WAAS

POR (134)

178°E

AOR-W (122)

54°W

EGNOS

AOR-E (120)

15.5°W

IOR (131)

64.5°E

118° W 34.75° W 24.5° E

121.25° E

2°

2°

2°

2°

122

120

131

134

AOR-W

AOR-E

IOR

POR

54° W

15.5° W

64.5° W

178° E

One-degree threshold

Longitude Range	Satellite
120.25° E to 117° W	134
119° W to 33.75° W	122
35.75° W to 25.5° E	120
23.5° E to 122.25° E	131

GEO satellite and coverage area

34

Image 44

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Word to the Owner of the GP-37, GP-32 FeaturesForeword GP-32 system configuration System ConfigurationGP-37 system configuration What is WAAS? Msas Egnos WaasEquipment Lists Standard supplyOptional equipment Name Type Code No Qty RemarksHow to attach and remove the hard cover Operational OverviewControls Control panelTurning On and Off Power Adjusting Brilliance and ContrastTurning on the power Turning off the powerDisplay modes default user displays Display ModesPlotter display Highway displayPlotter display Highway displaySteering display Nav data displaySteering display Nav data displayDigital display default display User displaysDigital display Speedometer displayHow to enter alphanumeric data Menu OverviewOFF AutoSimulator display, auto course selected Simulation DisplaySimulator menu Plotter Display Overview Choosing the Display RangeShifting the Cursor Cursor state and dataShifting the Display Centering Own Ship’s PositionChanging Track Plotting Interval, Stopping Plotting OFFErasing Track Erase menuErase Track YESPlotter Display Overview This page intentionally left blank Entering a waypoint with the cursor Waypoints MarksEntering Waypoints Entering a waypoint at own ship position Entering a waypoint from the waypoint listWPTS/MARKS List GPS POS. → MarkEntering the MOB Mark Enter a NEW WPT NameMark Saved to MOB GO to MOB ?Displaying Waypoint Name Operations on the Waypoint ListDSP RTE DSP ALL Editing waypointsErasing Waypoints Showing nearest waypoints by distance, TTG and ETAWPTS/MARKS Nearest Name KobeSpeed for Calculating Time-to-Go, Estimated Time of Arrival Routes Creating RoutesCreating a route with the cursor Sample routeRoutes Creating a route from the route menuWPTS/MARKS List Creating a route from the waypoint listRoutes Creating a track-based route Creating a track-based route manuallyCreating a track-based route automatically DistanceEditing Routes Replacing waypoints in a routeREMOVE? INSERT? SKIP? NameRoute contents Route-01 Permanently deleting a waypoint from a routeInserting a waypoint in a route Temporarily deselecting a waypoint in a routeErasing Routes Changing route comment nameErase Route 01 ? YESThis page intentionally left blank Setting Destination by Cursor Setting Destination by WaypointWPT-NEAR? OFF?? ROUTE? CURSOR? SETUP? DestinationSetting Route as Destination Setting User Waypoint as DestinationCanceling Destination REVERSE?Alarms Arrival Alarm, Anchor Watch AlarmArrival alarm AlarmsARV ANC XTE Cross Track Error AlarmAnchor watch alarm Speed Alarm WAAS/DGPS AlarmTime Alarm WAAS/DGPS mode and alarm messageTrip Alarm Odometer AlarmBuzzer Type Selection Long ConstantOther Functions Calculating Range, Bearing, TTG and ETARange and bearing between two waypoints RouteWaas Setup GPSWaas INT Beacon EXT BeaconDgps setup GPSProgramming Dgps user channels stations Editing Dgps user channelsStation Nearest Station UserBearing Reference Erasing all user channelsTrue Erasing individual user channelsUnits of Measurement Geodetic Chart SystemMagnetic Variation Time Difference using local time, Time Format Position Display FormatFor Loran C TD For Decca TDGPS Setup GPS Setup menu descriptionSpeedometer User Display SetupDigital data Resetting Trip and Odometer Distances Reset Trip METER? Are YOU SURE? YES no ODOMETER?Reset trip meter, odometer options Speedometer displayWiring Setting for communication software onUploading, Downloading Waypoint, Route Data Downloading/Uploading between PC and GP-37/GP-32Uploading data from a PC Loading data from a YeomanWaypoint data format Route data formatLanguage Route comment data formatEnd of sentence EspanolMaintenance & Troubleshooting MaintenanceDisplaying the Message Board MessagesReplacing the Battery Exchange BATTERY?Ready for Battery Change Press ANY KEY To Shut Down Replacing the FuseDiagnostics Satellite Monitor DisplaySatellite monitor display Test START? promptClearing Data Language and default position, unit and time difference Language Default Position Unit Time DifferenceThis page intentionally left blank Installation Installation of Display UnitMounting considerations Desktop and overhead mountingInstallation of Antenna Unit How to assemble the connectorFlush mount S kit Flush mount S kit Type OP20-17 Code NoWiring WiringHow to fix spring in fuse holder GroundingInitial Settings Output data format, data sentencesDATA1 Current loop data DATA2 RS-232C levelDATA1, Data 2 and Nmea version options Output settingSetup menu This page intentionally left blank Appendix Menu TreeDigital Display division Available data Odometer, trip , timeStart from -99 to +99 Interval 01 to 99Geodetic Chart List North AmericanLoran C Chains GRIDecca Chains Chain Location CodeAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator Index WAAS/DGPS XTEIndex-2