8.Press the [MENU] key twice to finish.
The current position is saved under the next sequential waypoint number, the display shows “***SAVED!” (*** = waypoint number) and a beep sounds. Thereafter waypoints are saved at the interval of time or distance set.
When 30 waypoints have been saved, a message informs you that you can no longer save waypoints to the route. Press the [ENT] key to erase the message. The route is automatically saved to “LOG” in the ROUTES menu, under the name of the first and last waypoint numbers used. Then, open the ROUTES menu and go to step 13.
You can manually stop saving waypoints and save the route by going to step 9.
9.After the desired number of waypoints have been entered, press the [MENU] key once or twice to open the menu.
10.Choose ROUTES and then press the [ENT] key.
11.Choose VOYAGE ROUTE and then press the [ENT] key.
12.Choose STOP and then press the [ENT] key.
13.Choose LOG and then press the [ENT]
key.
14.“MOVE?” is selected; press the [ENT] key. The route is moved from “LOG” and is registered under the next sequential route number.
15. Press the [MENU] key twice to finish.
4.2 Editing Routes
Replacing waypoints in a route
1.Press the [MENU] key once or twice to display the menu.
2.Choose ROUTES and then press the [ENT] key.
3.Choose the route to edit.
4.Press the [ENT] key.
4. ROUTES
5.Place the cursor on the waypoint to replace.
6.Press the [ENT] key to show the route edit options.
CHANGE?
REMOVE?
INSERT?
SKIP?
Quit?
Route edit options
7.“CHANGE?” is selected; press the [ENT] key.
NAME: | 001 |
|
|
34° 39.836'N | MARK | ||
135° 12.059'E | x | ||
| 10:25D | ||
TTG 02H00M ETA: 12:25
Exit?
Waypoint attribute edit screen
8.NAME is selected. Press the [ENT] key. Use the cursor pad to enter waypoint name.
9.Press the [ENT] key.
Note: If the name entered at step 8 does not exist, the window shown below appears. Choose “CREATE?”, “RENAME?” or “Quit?” as appropriate and then press the [ENT] key.
CREATE?
RENAME?
Quit?
Waypoint name options
10.Choose “Exit?.”
11.Press the [ENT] key.
12.Press the [MENU] key twice to finish.
23