Furuno GP32 manual User Display Setup, Digital data, Speedometer

Page 51

DISABLE GEO

Like GPS satellites, the GPS receiver automatically eliminates any malfunctioning WAAS satellite. To disable a WAAS satellite manually, enter three-digit satellite number with the cursor pad and then press the [ENT] key. To restore a satellite, enter “000”.

FIX MODE

Chooses position fixing method; 2D or 2/3D. 2D requires three satellites in view of the GPS receiver; 2/3D requires three or four satellites in view of the GPS receiver, whichever is available. When the 2D mode is selected, enter the antenna height above the waterline, to obtain accurate position data. The default setting is 5 m.

7.11 User Display Setup

The user displays, which appear when the [DISP] key is pressed several times, provide user-customized digital data and a speedometer.

Digital data

The user may choose 1-4 items of navigation data to display on the digital display.

1.Press the [MENU] key once or twice to open the menu.

2.Choose USER DISP and then press the [ENT] key.

USER DISPLAY

1: DIGITAL

2: SPEEDOMETER

USER DISPLAY menu

7.OTHER FUNCTIONS

3.Choose 1 or 2 and then press the [ENT] key.

OFF

DIGITAL

SPEEDOMETER

User display type options

4.Choose DIGITAL and then press the [ENT] key.

5.The cursor is selecting the square at the right side of the screen. Press the [ENT] key.

: 1 indication

: 2 indications

: 3 indications : 4 indications

User display screen division options

6.Choose the screen division desired, that is, the number of data to display, and then press the [ENT] key. The display now looks something like the one shown below.

USER DISPLAY

A:	POWER
			A C *
B: TRIP
C: SOG			B D

D:COG

*= Changes according to selection at step 6.

A		A		A

		B		B	C
		B		B	C

USER DISPLAY menu,

default digital display settings

7. “A” is selected. Press the [ENT] key.

NONE ODO TRIP

TIME POSN POWER

SOG COG WPT

XTE TTG ETA

Digital data options

41

Image 51

Contents Page 00080928811 Safety Instructions Safety Instructions for the Installer Table of Contents Outline Drawings Features ForewordWord to the Owner of the GP-37, GP-32 System Configuration GP-37 system configurationGP-32 system configuration Msas Egnos Waas What is WAAS?Name Type Code No Qty Remarks Equipment ListsStandard supply Optional equipmentControl panel How to attach and remove the hard coverOperational Overview ControlsTurning off the power Turning On and Off PowerAdjusting Brilliance and Contrast Turning on the powerDisplay Modes Display modes default user displaysHighway display Plotter displayHighway display Plotter displayNav data display Steering displayNav data display Steering displaySpeedometer display Digital display default displayUser displays Digital displayAuto How to enter alphanumeric dataMenu Overview OFFSimulation Display Simulator menuSimulator display, auto course selected Cursor state and data Plotter Display OverviewChoosing the Display Range Shifting the CursorOFF Shifting the DisplayCentering Own Ship’s Position Changing Track Plotting Interval, Stopping PlottingYES Erasing TrackErase menu Erase TrackPlotter Display Overview This page intentionally left blank Waypoints Marks Entering WaypointsEntering a waypoint with the cursor GPS POS. → Mark Entering a waypoint at own ship positionEntering a waypoint from the waypoint list WPTS/MARKS ListSaved to MOB GO to MOB ? Entering the MOB MarkEnter a NEW WPT Name MarkEditing waypoints Displaying Waypoint NameOperations on the Waypoint List DSP RTE DSP ALLName Kobe Erasing WaypointsShowing nearest waypoints by distance, TTG and ETA WPTS/MARKS NearestSpeed for Calculating Time-to-Go, Estimated Time of Arrival Sample route RoutesCreating Routes Creating a route with the cursorCreating a route from the route menu RoutesCreating a route from the waypoint list RoutesWPTS/MARKS List Distance Creating a track-based routeCreating a track-based route manually Creating a track-based route automaticallyName Editing RoutesReplacing waypoints in a route REMOVE? INSERT? SKIP?Temporarily deselecting a waypoint in a route Route contents Route-01Permanently deleting a waypoint from a route Inserting a waypoint in a routeYES Erasing RoutesChanging route comment name Erase Route 01 ?This page intentionally left blank Destination Setting Destination by CursorSetting Destination by Waypoint WPT-NEAR? OFF?? ROUTE? CURSOR? SETUP?REVERSE? Setting Route as DestinationSetting User Waypoint as Destination Canceling DestinationAlarms AlarmsArrival Alarm, Anchor Watch Alarm Arrival alarmXTE Cross Track Error Alarm Anchor watch alarmARV ANC WAAS/DGPS mode and alarm message Speed AlarmWAAS/DGPS Alarm Time AlarmLong Constant Trip AlarmOdometer Alarm Buzzer Type SelectionRoute Other FunctionsCalculating Range, Bearing, TTG and ETA Range and bearing between two waypointsEXT Beacon Waas SetupGPS Waas INT BeaconGPS Dgps setupStation User Programming Dgps user channels stationsEditing Dgps user channels Station NearestErasing individual user channels Bearing ReferenceErasing all user channels True Geodetic Chart System Magnetic Variation Units of Measurement For Decca TD Time Difference using local time, Time FormatPosition Display Format For Loran C TDGPS Setup menu description GPS SetupUser Display Setup Digital dataSpeedometer Speedometer display Resetting Trip and Odometer DistancesReset Trip METER? Are YOU SURE? YES no ODOMETER? Reset trip meter, odometer optionsDownloading/Uploading between PC and GP-37/GP-32 WiringSetting for communication software on Uploading, Downloading Waypoint, Route DataLoading data from a Yeoman Uploading data from a PCRoute data format Waypoint data formatEspanol LanguageRoute comment data format End of sentenceMessages Maintenance & TroubleshootingMaintenance Displaying the Message BoardReplacing the Fuse Replacing the BatteryExchange BATTERY? Ready for Battery Change Press ANY KEY To Shut DownTest START? prompt DiagnosticsSatellite Monitor Display Satellite monitor displayClearing Data Language Default Position Unit Time Difference Language and default position, unit and time differenceThis page intentionally left blank Desktop and overhead mounting InstallationInstallation of Display Unit Mounting considerationsFlush mount S kit Type OP20-17 Code No Installation of Antenna UnitHow to assemble the connector Flush mount S kitGrounding WiringWiring How to fix spring in fuse holderDATA2 RS-232C level Initial SettingsOutput data format, data sentences DATA1 Current loop dataOutput setting Setup menuDATA1, Data 2 and Nmea version options This page intentionally left blank Menu Tree AppendixInterval 01 to 99 Digital Display divisionAvailable data Odometer, trip , time Start from -99 to +99North American Geodetic Chart ListGRI Loran C ChainsChain Location Code Decca ChainsAP-6 Specifications GPS Navigator GP-32 Dgps Navigator GP-37 Power Supply CT4UWOK Feb Hatai Page Page Page GPS Navigator Dgps Navigator WAAS/DGPS XTE IndexIndex-2