Furuno 1943C-BB, GD-1900C-BB, 1953C-BB manual Mounting the Memory Card Interface Unit, Desktop mount

1.7Mounting the Memory Card Interface Unit

Flush mounting

This unit can be flush-mounted in a panel with the standard installation materials.

1.Prepare a cutout in the mounting location, referring to the outline drawing at the end of this manual.

2.Screw in the threaded rods to the flange of the front panel of the unit securely by hands.

3.Set the unit to the cutout.

4.Insert the flat washer, spring washer and nut in that order for each rod and fasten the nuts.

Flush mounting

Desktop mount

For desktop mount, the optional desktop mount kit FP03-10201 is required. Refer to the end of this manual.

1.Put the mounting bracket 19-023-3081 on the unit.

2.Fix the mounting bracket to the unit with four screws.

3.Mount the above assembly on a desktop with four tapping screws.

1-28