Note: The power for the power supply unit and processor unit must be drawn from the same power switch on the ship’s power terminal board.
Other Equipment (ex. GPS, E/S, etc.)
Processor unit
Power supply unit
POWER |
|
| SLAVE DISPLAY |
OUTPUT |
|
12 VDC |
|
NTSC/PAL |
|
RGB OUT |
|
| |
OPTION |
|
INPUT | NETWORK CONT DATA 3 DATA 2 DATA 1 |
| |
CARD SLOT |
|
Other Equipment | |
(ex. GPS, E/S, etc.) | |
Other Equipment | |
(ex. GPS, E/S, etc.) | |
Other Equipment | |
(ex. GPS, E/S, etc.) | |
Other Equipment | |
(ex. GPS, E/S, etc.) | |
Ship's power terminal board
Replacement of the fuse
The power supply unit is shipped with a 15 A fuse. Replace the 15 A fuse with a 7 A fuse (supplied) when the ship’s battery is 24 VDC. The fuse in the processor unit is also 15 A. Replace it with a 3A fuse.