Furuno 1953C-BB, GD-1900C-BB, 1943C-BB, 1933C-BB, 1823C-BB Contents of Data 1 and DATA2 Port menus

7.Select sentence and press the A: ON/OFF soft key to show ON (output) or “- -“ (no output) as appropriate.

8.Press the E: RETURN soft key.

9.Press the [MENU] key to quit.

Contents of DATA 1 and DATA2 PORT menus

Item	Description	Settings	Default Setting
FURUNO GPS	Selects whether the GPS Receiver	Yes, No	Yes (DATA1)
Sensor	GP-310B/320Bis connected to the		No (DATA2)
	DATA1 or DATA2 port or not.
Output Format	Selects NMEA output version for the	NMEA0183 Ver.	NMEA0183 Ver. 2.0
	equipment connected.	1.5, NMEA0183
		Ver. 2.0
Lat/Lon Format	Selects latitude/longitude format to	DD°MM.MM’,	DD°MM.MMM’
	output.	DD°MM.MMM,
		DD°MM.MMMM’
Output Destination	Selects whether to output route (data	Yes, No	No
	sentence RTE) and waypoint data (data
	sentence WPL) when destination is set.
SELECT SNTNC	Selects data sentence(s) to output. Select	sentence with the trackball and press the
(soft key)	ON/OFF soft key to show ON or “- -“ (OFF) as appropriate. See the figure on page 3-16
	sentence and default settings.

3-17