Outback Power Systems GFX1424E, GFX1312E, GFX1448E manual Selling or Charging Stopped

Page 42

Troubleshooting

Selling or Charging Stopped

This screen displays a code number that identifies the status of the inverter’s charging or selling functions. In the MATE, this screen is titled “Stop Sell Reasons”, even though it also refers to charging. If the inverter has stopped selling or charging unexpectedly, this screen may help identify the reason. The code numbers do not usually identify inverter failures. More often they are used by a normally functioning inverter to identify external conditions that are preventing selling or charging. (If nothing has stopped, the code will indicate that as well.) See the system display manual for instructions on viewing these messages.

The acceptable limits for AC source voltage and frequency are displayed on page 46. If the AC source exceeds these limits, the inverter will stop selling and display the appropriate code. After the source returns to the acceptable range, the system display will begin a 1-minute timer. When the timer expires, the inverter will begin selling power again.

If the AC source is unstable, it may become unacceptable before the timer expires. This may cause the timer to continually reset. It is possible for brief fluctuations to occur that are too fast to be seen on a DVM. If this happens, the appropriate code will still appear on the system display for a short time to help troubleshoot the problem.

Selling current tends to raise the AC voltage by a few volts. If the utility grid has a higher voltage than nominal, selling may raise the voltage to an unacceptable level. The inverter will compensate for this effect by automatically reducing the amount of current it sells.

Additionally, undersized wires or bad connections can result in local voltage problems. If code 5 is accompanied by voltage changes that do not appear at the main utility connection, check the wiring.

Table 8 Stop Sell (and Charge) Reasons

Code Definition

0The inverter is selling power to the grid.

1 The inverter is charging batteries.

The inverter is designated as 3p Classic B or 3p Classic C. It has been commanded to stop

2charging or selling, usually because the master has gone silent. To find the exact cause, check the “Stop Sell Reason” on the master.

3

A 1-minute reconnect timer is in effect for selling. This timer takes effect as soon as the AC source

becomes acceptable.

 

The AC source voltage is below the acceptable limit for selling. Once it is restored, the display will

4change to code 3 and start the 1-minute timer. This code will also appear if the AC source fails or is completely disconnected.

5

The AC source voltage is above the acceptable limit for selling. Once it is restored, the display will

change to code 3 and start the 1-minute timer.

 

 

 

6

The AC source frequency is below the acceptable limit for selling. Once it is restored, the display

will change to code 3 and start the 1-minute timer.

 

 

 

7

The AC source frequency is above the acceptable limit for selling. Once it is restored, the display

will change to code 3 and start the 1-minute timer.

 

40

900-0112-01-00 Rev B

Page 41 Page 43
Image 42
Page 41 Page 43
Contents International Series GFX Inverter/Charger GFX1312E GFX1424E GFX1448ETrademarks Symbols Used General SafetyAudience Definitions Terms and DefinitionsTerm Definition Table of Contents Table of Contents List of Tables List of FiguresPage Welcome to OutBack Power Technologies IntroductionSystem Display and Controller MATE3 and Mate System Display and ControllerFunctional Test Pre-startup ProceduresCommissioning StartupPowering Down Adding New DevicesLED Indicators Battery LED ValuesOperation Operation Status LED Quick ReferenceDescription of Functions InvertingSearch InputAC Current Settings AC Source AcceptanceGenerators TransferInput Support Battery Charging No ChargingBulk Stage Absorption Stage SellFloat Stage Float TimerSilent Repeated SilentNew Absorption Stage Absorption TimerNew Charging Cycle Repeated Charging CyclesBattery Temperature Compensation EqualizationExamples Selling Multiple-Inverter Installations Stacking OutBack HUB4 and MateThree-Phase Stacking Parallel Stacking Dual-Stack and LargerPower Save Levels Auxiliary Terminals Operation Advanced Generator Start AGS High Battery Transfer HBXSystem Display-Based Functions Grid Use ProgrammingTroubleshooting Basic TroubleshootingTroubleshooting User To Gen in the AC Input and Current Limit Limits or Gen AC Input Voltage Limits Terminals with a DC voltmeter. If voltage is Error Messages Error TroubleshootingMessage Definition Possible Remedy Acin freq too highDisconnect Messages Acin voltage maxSelling or Charging Stopped Stop Sell and Charge Reasons Code DefinitionProgrammed setting. It cannot charge or sell Stop Sell and Charge ReasonsPage Electrical Specifications GFX1312E Value SpecificationsSpecifications for Model GFX1312E Mechanical Specifications GFX1312ESpecifications for Model GFX1424E Electrical Specifications GFX1424E ValueMechanical Specifications GFX1424E Specifications for Model GFX1448E Electrical Specifications GFX1448E ValueMechanical Specifications GFX1448E Environmental Specifications for All Models Value Environmental SpecificationsRegulatory Specifications Grid-Interactive UseDefault Settings and Ranges viewed in Mate 12-Volt Inverter Settings MateVolt Inverter Settings Mate Input48-Volt Inverter Settings Mate Battery vdc adjustment26Default Settings and Ranges viewed in MATE3 Volt Inverter Settings MATE324-Volt Inverter Settings MATE3 Vent Fan Enable VoltageStacking Power Save OutBack Power Technologies Product RegistrationProduct Registration Warranty Year Limited Warranty for GFX ProductsReturn Material Authorization RMA How to Arrange for Warranty ServiceTroubleshooting Contacting OutBackOut of Warranty Returning Product to OutBackThis page intentionally left blank Index AUX FunctionsIndex Index Arlington, WA 98223 USA +1.360.435.6030
Related manuals
Manual 40 pages 41.66 Kb

GFX1448E, GFX1424E, GFX1312E specifications

Outback Power Systems has long been recognized for its innovation and reliability in the field of renewable energy solutions, particularly with its GFX series of grid-tied inverters. The GFX1312E, GFX1424E, and GFX1448E models exemplify their commitment to quality and performance, making them ideal choices for both residential and commercial applications.

The GFX1312E is designed to deliver a solid 1300 watts of continuous output power at 12 volts, offering efficient energy conversion for smaller solar setups or off-grid living situations. Its compact design allows for easy installation, while advanced engineering ensures high performance even in challenging conditions. The GFX1312E features a pure sine wave output, which is critical for sensitive electronic devices, ensuring compatibility and safeguarding against potential damage.

Moving up in power capacity, the GFX1424E operates at 1400 watts with a 24-volt configuration. This model is particularly well-suited for medium-sized solar energy systems. It supports 120/240 volts split-phase output, providing greater flexibility for various household appliances and ensuring that users can maximize their energy usage with efficiency. The GFX1424E also incorporates an extensive array of intelligent charging profiles that optimize battery performance and longevity.

The GFX1448E caps the series with impressive 1400 watts of continuous output at 48 volts, catering primarily to larger installations and those requiring more robust energy management solutions. This inverter is equipped with Outback's patented GridZero™ technology, allowing for seamless integration of solar energy production with utility power, helping users to minimize grid dependence while maximizing savings. With advanced features like backup capability and grid-interactive operation, this model is highly versatile.

All three models share key characteristics such as network connectivity through the Outback Power's MATE series of controllers, enabling real-time monitoring and system management. They are designed for durability and have protective features against overloads and short circuits, ensuring reliable performance over time. With their modular design, users can easily scale their system by connecting multiple units, making these inverters a practical choice for expanding energy needs.

In summary, the Outback Power Systems GFX1312E, GFX1424E, and GFX1448E inverters provide top-tier options for those looking to harness solar energy efficiently. Their respective power outputs, advanced technologies, and user-friendly interfaces position them as excellent choices for both residential and commercial energy solutions, underscoring Outback's reputation as a leader in the renewable energy market.
Top Page Image Contents