![](/images/new-backgrounds/1135527/13552795x1.webp)
Specifications
Environmental Specifications
Table 15 Environmental Specifications for All Models
Specification | Value |
Rated Temperature Range (meets all specifications) | 0°C to 50°C |
| (32°F to 122°F) |
Operational Temperature Range (functions, but does not necessarily meet all specifications) | |
| |
Storage Temperature Range | |
|
Regulatory Specifications
The International Series GFX inverters are CE compliant for
Grid-Interactive Use
Inverters intended for
utility source.
The OutBack
¾The THD of the root mean square (RMS) current is less than 5%.
¾The output of the GFX inverter exceeds the minimum power factor of 0.85 with a typical power factor of 0.96 or better.
¾All International Series GFX inverters are tested to comply with Table 16.
Table 16 Interconnection Response to Voltage and Frequency
Voltage Range |
| Allowed Time | Measured Time |
(AC Volts) | Frequency (Hz) | (Seconds) | (Seconds) |
V < 115 | 50 | 0.16 | 0.020 |
115 ≤ V < 202.4 | 50 | 2.00 | 0.155 |
202.4 to 253 | 50 | No interruption | No interruption |
253 < V < 276 | 50 | 1.00 | 0.157 |
|
|
| Instantaneous, but 0.137 seconds |
V ≥ 276 | 50 | 0.16 | to zero current |
IEEE setting | > 51 | 0.16 | 0.098 |
IEEE setting | < 49 | 0.16 | 0.102 |
User setting | > 52 | 1.00 | 0.605 |
User setting | < 48 | 1.00 | 0.656 |
The acceptance ranges are selected using the system display. The options are IEEE and USER. The default setting is USER.
¾The IEEE option allows a range of 206 to 250 Vac at 49 to 51 Hz.
¾The USER option is not a fixed setting. It follows the ac1/grid lower limit and ac1/grid upper limit settings as shown on the tables beginning on page 47. The default is a range of 208 to 252 Vac at 48 to 52 Hz.
Reconnection delay is 12 seconds after restoration of acceptable conditions. Sell delay is one minute. These settings are not adjustable.
46 |