Blade | Husqvarna FS 8400 D, FS 6600 D specs

SAFETY FIRST!

WARNINGS

DO’s AND DO NOT’s

WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING

INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.

DO Read this entire operator’s manual before operating this machine. Understand all warnings, instructions, and controls.

DO keep all guards in place and in good condition.

DO wear safety approved hearing, eye, head and respiratory protection. DO read and understand all warnings and instructions on the machine. DO read and understand the symbol definitions contained in this manual.

DO keep all parts of your body away from the blade and all other moving parts. DO know how to stop the machine quickly in case of emergency.

DO shut off the engine and allow it to cool before refueling or doing maintenance. DO inspect the blade, flanges and shafts for damage before installing the blade. DO use the blade flange size shown for each blade size.

DO use only steel center diamond blades manufactured for use on concrete saws.

DO use only the blade flanges supplied with the saw. Never use damaged or worn blade flanges.

DO use only blades marked with a maximum operating speed greater than the blade shaft speed. Verify speed by checking blade shaft rpm and pulley diameters and blade flange diameters.

DO verify saw drive configuration by checking blade shaft RPM, pulley diameters, and blade flange diameter. DO read all safety materials and instructions that accompany any blade used with this machine.

DO inspect each blade carefully before using it. If there are any signs of damage or unusual wear, DO NOT USE

THE BLADE.

DO mount the blade solidly and firmly, Wrench tighten the arbor nut.

DO make sure the blade and flanges are clean and free of dirt and debris before mounting the blade on the saw. DO use the correct blade for the type of work being done. Check with blade manufacturer if you do not know if

blade is correct.

DO use caution and follow the instructions when loading and unloading the machine.

DO operate this machine only in well ventilated areas. Breathing Poison Exhaust Gas could result in death. DO instruct bystanders on where to stand while the machine is in operation.

DO establish a training program for all operators of this machine.

DO clear the work area of unnecessary people. Never allow anyone to stand in front of or behind the blade while the engine is running.

DO make sure the blade is not contacting anything before starting the engine. DO use caution when lifting and transporting this machine.

DO always tie down the machine when transporting.

DO use caution and follow instructions when setting up or transporting the machine. DO have all service performed by competent service personnel

DO verify the blade arbor hole matches the machine spindle before mounting the blade.

DO always check for buried electrical cables before sawing. If unsure, contact the local utilities.

DO move the machine at least 10 feet (3 meters) from the fueling point before starting the engine and make sure the fuel cap is on the machine and properly tightened.

DO lift only from the lift bail.

DO clean the machine after each day’s use.

DO use the proper blade flange size for each blade size. Never use damaged or worn blade flanges. DO use caution when handling fuel.

DO only cut in a straight line.

DO only saw as deep as the job specifications require.

DO always give a copy of this manual to the equipment user. If you need extra copies, call TOLL FREE 1‑800‑288-5040 in USA, or for International, call +1-913-928-1300.

FS 6600 D, FS 8400 D specifications

Husqvarna has long been a trusted name in the world of professional outdoor power equipment, and its FS 6600 D and FSA 8400 D models exemplify the company's commitment to quality and performance.

The Husqvarna FS 6600 D is a powerful walk-behind concrete saw that is renowned for its exceptional cutting efficiency and robust design. Powered by a high-torque diesel engine, the FS 6600 D is engineered to handle tough, heavy-duty applications with ease. One of its standout features is its adjustable, heavy-duty frame that can accommodate various blade sizes, making it versatile for different cutting depths and applications. The saw's integrated water system helps to manage dust and keeps the blade cool during operation, resulting in cleaner cuts and prolonging blade life. Furthermore, the intelligent design of the FS 6600 D includes an easy-to-use control panel, ensuring operators can quickly start and adjust the saw without hassle.

On the other hand, the Husqvarna FSA 8400 D is part of Husqvarna’s range of professional grass trimmers, specifically designed for demanding tasks and prolonged use. Its lightweight yet robust design makes it an ideal choice for professionals who require mobility and efficiency. The FSA 8400 D features a high-capacity battery and an efficient brushless motor, ensuring powerful performance with minimal noise and vibration. The trimmer’s adjustable handle and ergonomic design allow users to maneuver easily, reducing fatigue during extended usage.

Both products also incorporate advanced technologies to enhance user experience. For instance, the FS 6600 D employs Husqvarna’s SmartStart technology, allowing for easier and faster starts. Similarly, the FSA 8400 D utilizes an intuitive control system that seamlessly integrates speed and power settings, optimizing performance based on the demands of the task at hand.

In summary, the Husqvarna FS 6600 D and FSA 8400 D are prime examples of innovative engineering combined with user-focused design. Their robust features, advanced technologies, and unmatched performance make them essential tools for professionals looking to excel in their trade. Whether cutting concrete or tidying up grassy areas, Husqvarna proves that it understands the needs of its users, delivering reliable solutions that stand the test of time.