SAFETY INFORMATION
LOADING AND UNLOADING
If lighting system is equipped with a transport lifting hook, refer to the following safety information.
CAUTION
Before lifting, make sure that lighting system parts are not damaged and screws are not loosened or lost.
ALWAYS make sure crane or lifting device has been properly secured to lifting hook of the equipment.
NEVER lift the equipment while lighting system is running.
Make sure the mast is completely lowered before lifting the lighting system.
Use adequate lifting cable (wire or rope) of suffi cient strength.
Use one point suspension hook and lift straight upwards.
Never allow any person or animal to stand underneath the equipment while lifting.
DO NOT lift machine to unnecessary heights.
TRANSPORTING SAFETY
NOTICE
When transporting the lighting system, if applicable, always place in stow position and place mast in its carrying case.
ALWAYS remove balloon/lamp assembly from the mast when transporting lighting system. This will prevent damage to the bulb due to vibration.
NEVER leave the balloon/lamp exposed during transport. Exposure to excess wind or rain could damage the balloon’s nylon cover.
ALWAYS place balloon inside its protective cover during transport. Be sure the cover is secured tightly around the balloon/lamp assembly.
GB114BS/BP GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #3 (01/06/09) — PAGE 7