Graco 3A1163A important safety instructions ProControl 1KS, II 2 G

Page 1

Installation

ProControl™ 1KS

3A1163A

ENG

Automatic system for fluid management of single component coatings. Includes flow control, flushing, and color change. For professional use only.

Approved for use in explosive atmospheres (except the EasyKey).

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

See pages 4-5for model information, including maxi- mum working pressure. Equipment approval labels are on page 3. Some components shown are not included with all systems.

TI16328a

#53

II 2 G

Image 1

Contents II 2 G ProControl 1KSContents Equipment Approvals Related ManualsModels System Configuration and Part NumbersLabel Location on EasyKey Accessory FeatureFire and Explosion Hazard Skin Injection Hazard Toxic Fluid or Fumes Hazard Important Two-Component Material Information Component Identification and Definition Assembly FC Control Box Power Supply Cable PS Flow ControlComponent Description Fluid Manifold FM Pneumatically Operated Dose Valve for component aLocation Intrinsically Safe Installation RequirementsLocation Requirements Optional CablesRequirements on NON-HAZARDOUS Hazardous Classified Location Location onlyGeneral Information See Dimensions and Mounting Hole Layouts,Wall Mounting ProControl 1KS System Layout Drawing Wall Mounting Air Supply See the System Pneumatic Schematic onRequirements Air ConnectionsFluid Connections Fluid SupplyColor Change Valve Stack TI11668a Color Change Board and Solenoid ValvesFlow Control Regulator Regulator Fluid Air Fluid Out FC CableElectrical Requirements Connect Main PowerConnect EasyKey to Fluid Station Control EasyKey Connections and AC Power SwitchFluid Station Board Connections Connect Color Change Module Color Change Board Switch Settings Two Color Change BoardsOne Color Change Board J11 IG . Color Change Board Switches S3-S6 Switch S3-S6Positions Wiring Diagram Check Resistance GroundingRobot EasyKey Display Control BoxSystem Pneumatic Schematic Schematic DiagramsNon-Hazardous Area System Electrical SchematicHazardous Area Wall Panel Mounting bracket only Dimensions and Mounting Hole LayoutsFlow Control Module Air Supply Control EasyKeyDimensions and Mounting Hole Layouts Maximum fluid working pressure Maximum working air pressure Technical DataGraco Information Graco Standard Warranty