Graco 3A1163A System Configuration and Part Numbers, Models, Label Location on EasyKey

Page 4

System Configuration and Part Numbers

System Configuration and Part Numbers

Models

The part number for your equipment is printed on the equipment identification labels. See FIG. 1 for location of the identification labels.

				Meter		Flow Control

Part No.	Series	Description	None	G3000	Coriolis	No	Yes

262380	A	ProControl 1KS	✔			✔

262381	A	ProControl 1KS		✔		✔

262382	A	ProControl 1KS		✔			✔

262383	A	ProControl 1KS			✔		✔

Label Location
on Fluid Station
Control Box	TI15974a

Maximum Fluid

Working Pressure

is listed here

ProControl 1KS

Electronic Proportioner

	C	US
FM08ATEX0074
II 2 G	Intrinsically safe

Ex ia IIA T3	equipment for Class I,
	Div 1, Group D, T3
	Ta = -20°C to 50°C

MAX AIR WPR

.7	7	100
MPa	bar	PSI
MAX FLUID WPR
1.31	13.1	190

MPa bar PSI

MAX TEMP 50°C (122°F)

Intrinsically Safe (IS) System. Install per IS Control Drawing No. 289833. EasyKey Interface IS Associated Apparatus for use in non hazardous location, with IS Connection to Smart Fluid Plate IS

Apparatus for use in:

Class I, Division 1, Group D T3 C Hazardous Locations

Read Instruction Manual

Warning: Substitution of components may impair intrinsic safety.

PART NO.	SERIES	SERIAL
MFG. YR.		GRACO INC.
		P.O. Box 1441
		Minneapolis, MN
		55440 U.S.A.

Label Location on EasyKey

TI15975a

Part Number

FIG. 1: Identification Label, ProControl 1KS Systems

4

3A1163A

Image 4

Contents ProControl 1KS II 2 GContents Related Manuals Equipment ApprovalsModels System Configuration and Part NumbersLabel Location on EasyKey Feature AccessoryFire and Explosion Hazard Skin Injection Hazard Toxic Fluid or Fumes Hazard Important Two-Component Material Information Component Identification and Definition Control Box Power Supply Cable PS Flow Control Assembly FCComponent Description Fluid Manifold FM Pneumatically Operated Dose Valve for component aIntrinsically Safe Installation Requirements LocationLocation Requirements Optional CablesNON-HAZARDOUS Hazardous Classified Location Location only Requirements onGeneral Information See Dimensions and Mounting Hole Layouts,Wall Mounting ProControl 1KS System Layout Drawing Wall Mounting See the System Pneumatic Schematic on Air SupplyRequirements Air ConnectionsFluid Supply Fluid ConnectionsColor Change Board and Solenoid Valves Color Change Valve Stack TI11668aRegulator Fluid Air Fluid Out FC Cable Flow Control RegulatorRequirements Connect Main Power ElectricalEasyKey Connections and AC Power Switch Connect EasyKey to Fluid Station ControlFluid Station Board Connections Connect Color Change Module Color Change Board Switch Settings Two Color Change BoardsOne Color Change Board J11 IG . Color Change Board Switches S3-S6 Switch S3-S6Positions Wiring Diagram Grounding Check ResistanceEasyKey Display Control Box RobotSchematic Diagrams System Pneumatic SchematicSystem Electrical Schematic Non-Hazardous AreaHazardous Area Dimensions and Mounting Hole Layouts Wall Panel Mounting bracket onlyEasyKey Flow Control Module Air Supply ControlDimensions and Mounting Hole Layouts Technical Data Maximum fluid working pressure Maximum working air pressureGraco Standard Warranty Graco Information