Graco 3A1163A important safety instructions Toxic Fluid or Fumes Hazard

Page 8

Warnings

WARNING

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

•Read MSDSs to know the specific hazards of the fluids you are using.

•Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

•Always wear chemically impermeable gloves when spraying, dispensing, or cleaning equipment.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This equipment includes but is not limited to:

•Protective eyewear, and hearing protection.

•Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

8

3A1163A

Image 8

Contents ProControl 1KS II 2 GContents Related Manuals Equipment ApprovalsLabel Location on EasyKey System Configuration and Part NumbersModels Feature AccessoryFire and Explosion Hazard Skin Injection Hazard Toxic Fluid or Fumes Hazard Important Two-Component Material Information Component Identification and Definition Control Box Power Supply Cable PS Flow Control Assembly FCComponent Description Fluid Manifold FM Pneumatically Operated Dose Valve for component aIntrinsically Safe Installation Requirements LocationLocation Requirements Optional CablesNON-HAZARDOUS Hazardous Classified Location Location only Requirements onWall Mounting See Dimensions and Mounting Hole Layouts,General Information ProControl 1KS System Layout Drawing Wall Mounting See the System Pneumatic Schematic on Air SupplyRequirements Air ConnectionsFluid Supply Fluid ConnectionsColor Change Board and Solenoid Valves Color Change Valve Stack TI11668aRegulator Fluid Air Fluid Out FC Cable Flow Control RegulatorRequirements Connect Main Power ElectricalEasyKey Connections and AC Power Switch Connect EasyKey to Fluid Station ControlFluid Station Board Connections One Color Change Board Color Change Board Switch Settings Two Color Change BoardsConnect Color Change Module Positions Switch S3-S6J11 IG . Color Change Board Switches S3-S6 Wiring Diagram Grounding Check ResistanceEasyKey Display Control Box RobotSchematic Diagrams System Pneumatic SchematicSystem Electrical Schematic Non-Hazardous AreaHazardous Area Dimensions and Mounting Hole Layouts Wall Panel Mounting bracket onlyEasyKey Flow Control Module Air Supply ControlDimensions and Mounting Hole Layouts Technical Data Maximum fluid working pressure Maximum working air pressureGraco Standard Warranty Graco Information