Graco 3A1163A important safety instructions Component Identification and Definition

Page 10

Component Identification and Definition

Component Identification and Definition

See Table 1, and FIG. 2 for the system components.

EKCCM

	Air Control
	Module
	Purge
PS*	Air		FC (see
	Regulator		FC (see
	V/P Air		FIG. 8)
	V/P Air	Fluid	FIG. 8)

FO*
ST
ACV		FC Cable*
ACV
		Logic Air
	FM (see	MA
	FIG. 6)
* See the ProControl 1KS
Repair-Parts manual for
optional cable lengths.		TI15961b
FIG. 2. ProControl 1KS System, shown with G3000 Meter, Color Change, and Flow Control

		Table 1: Component Descriptions

Component		Description

EasyKey (EK)	Used to set up, display, operate, and monitor the system. The EasyKey accepts 85-250
	VAC, 50/60 Hz line power and converts that power to acceptable low voltage and optical
	signals used by other system components.

Fluid Station	Includes air control solenoids. Its control board manages all fluid functions.
Control Box (ST)

10

3A1163A

Image 10

Contents ProControl 1KS II 2 GContents Related Manuals Equipment ApprovalsModels System Configuration and Part NumbersLabel Location on EasyKey Feature AccessoryFire and Explosion Hazard Skin Injection Hazard Toxic Fluid or Fumes Hazard Important Two-Component Material Information Component Identification and Definition Component Description Fluid Manifold FM Control Box Power Supply Cable PS Flow ControlAssembly FC Pneumatically Operated Dose Valve for component aLocation Requirements Intrinsically Safe Installation RequirementsLocation Optional CablesNON-HAZARDOUS Hazardous Classified Location Location only Requirements onGeneral Information See Dimensions and Mounting Hole Layouts,Wall Mounting ProControl 1KS System Layout Drawing Wall Mounting Requirements See the System Pneumatic Schematic onAir Supply Air ConnectionsFluid Supply Fluid ConnectionsColor Change Board and Solenoid Valves Color Change Valve Stack TI11668aRegulator Fluid Air Fluid Out FC Cable Flow Control RegulatorRequirements Connect Main Power ElectricalEasyKey Connections and AC Power Switch Connect EasyKey to Fluid Station ControlFluid Station Board Connections Connect Color Change Module Color Change Board Switch Settings Two Color Change BoardsOne Color Change Board J11 IG . Color Change Board Switches S3-S6 Switch S3-S6Positions Wiring Diagram Grounding Check ResistanceEasyKey Display Control Box RobotSchematic Diagrams System Pneumatic SchematicSystem Electrical Schematic Non-Hazardous AreaHazardous Area Dimensions and Mounting Hole Layouts Wall Panel Mounting bracket onlyEasyKey Flow Control Module Air Supply ControlDimensions and Mounting Hole Layouts Technical Data Maximum fluid working pressure Maximum working air pressureGraco Standard Warranty Graco Information