Furuno GP-7000F installation manual Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB

Page 24

1.4Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB

1.Dry-dock the boat.

2.Make a hole of approx. 51 mm diameter in the mounting location.

3.Unfasten locknut and remove the sensor section.

4.Apply high-grade sealant to the flange of the sensor.

5.Pass the sensor casing through the hole.

6.Face the notch on the sensor toward boat's bow and tighten the flange.

7.Set the sensor section to the sensor casing and tighten the locknut.

8.Launch the boat and check for water leakage around the sensor.

Locknut

Face "notch" toward bow.

Flange Nut

Coat with

51

123

silicone sealant. Brim

φ77	Unit: mm

Speed/water temperature sensor ST-02MSB, ST-02PSB

18

Image 24

Contents Color GPS/PLOTTER/SOUNDER GP-7000F Iii00014914012 Safety Instructions System Configuration Standard supply Name Type Code No Qty RemarksOptional equipment Name Type Code No QtyDisplay Unit Mounting considerationsMounting Desktop, overhead mountingFlush mounting Antenna Unit Remarks on installation TransducerInside-hull mounting Necessary toolsAttaching the transducer Final preparationsCoating transducer face with silicone sealant Squeezing out air bubbles in adhesiveThru-hull mount transducer mounting dimensions millimeters Thru-hull mountingTransducer mounting location Acceptable transducer mounting locations Suitable transducer mounting locationsProcedure for installing the thru-hull mount transducer Construction of fairing blockTransducer mounting Installing the transom mount transducer on a flat hull Transom mount transducerInstalling the transom mount transducer on a deep-V hull Transducer preparationOptional triducer Triducer 525ST-MSDHeight required at mounting location Mounting location on single drive boatInstallation template Sensor position and transom angle Vertical adjustment and cable routing Attaching the sensor to the bracketPage Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB Speed/water temperature sensor ST-02MSB, ST-02PSBWiring Power source TransducerGround Connecting the antenna cable Antenna Code no Contents Cable setAntenna cable Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Optional transducer Fabricating the transducer cablePart Type Code No Qty Remarks Adjustments Choosing Position Data SourceINPUT/OUTPUT menu Choosing Port I/O Format Nmea 1 INPUT, Nmea 1 Output menusInput Description of Nmea optionsOutput FormatInput data, sentence priority Port Format Data sentence RemarksEcho Sounder Settings Setting transducer model, output powerOutput Power Transducer Echo Sounder System Setup menuCalibrating speed/water temperature sensor, setting draft Sensor Setup menuEcho Sounder menu Setting range Choosing Data SourcesCalibrating Nmea Depth, Speed and Water Temperature Data Setting rangeEXT Nmea menu Waypoint, Route Format External Event FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F