Furuno GP-7000F installation manual Flush mounting

Page 9

Flush mounting

B A

If the thickness of the console is 11-14 mm, use the washer head screws (M4x20) supplied with the installation materials. If it is thicker than those dimensions, the length of the screws should be the thickness of the console plus 7.3 mm ± 1.5 mm. The length of the threaded portion to be inserted to the display unit should not exceed 7 mm (B = 7).

A: Thickness of console

1.Prepare a cutout in the mounting location using the template provided.

2.Fix the display unit with six washer head screws (M4x20) provided.

5280150 Service Clearance

Unit: mm

Mounting dimensions for flush mounting

3

Image 9

Contents Iii Color GPS/PLOTTER/SOUNDER GP-7000F00014914012 Safety Instructions System Configuration Name Type Code No Qty Remarks Standard supplyName Type Code No Qty Optional equipmentMounting considerations Display UnitDesktop, overhead mounting MountingFlush mounting Antenna Unit Transducer Remarks on installationInside-hull mounting Necessary toolsFinal preparations Attaching the transducerCoating transducer face with silicone sealant Squeezing out air bubbles in adhesiveThru-hull mount transducer mounting dimensions millimeters Thru-hull mountingTransducer mounting location Suitable transducer mounting locations Acceptable transducer mounting locationsProcedure for installing the thru-hull mount transducer Construction of fairing blockTransducer mounting Transom mount transducer Installing the transom mount transducer on a flat hullTransducer preparation Installing the transom mount transducer on a deep-V hullTriducer 525ST-MSD Optional triducerMounting location on single drive boat Height required at mounting locationInstallation template Sensor position and transom angle Attaching the sensor to the bracket Vertical adjustment and cable routingPage Speed/water temperature sensor ST-02MSB, ST-02PSB Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSBWiring Transducer Power sourceGround Antenna Code no Contents Cable set Connecting the antenna cableAntenna cable Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Optional transducer Fabricating the transducer cablePart Type Code No Qty Remarks Choosing Position Data Source AdjustmentsINPUT/OUTPUT menu Nmea 1 INPUT, Nmea 1 Output menus Choosing Port I/O FormatInput Description of Nmea optionsFormat OutputInput data, sentence priority Port Format Data sentence RemarksSetting transducer model, output power Echo Sounder SettingsOutput Power Transducer Echo Sounder System Setup menuCalibrating speed/water temperature sensor, setting draft Sensor Setup menuEcho Sounder menu Choosing Data Sources Setting rangeCalibrating Nmea Depth, Speed and Water Temperature Data Setting rangeEXT Nmea menu External Event Format Waypoint, Route FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F