Furuno GP-7000F installation manual Mounting, Desktop, overhead mounting

Page 8

Mounting

Desktop, overhead mounting

1.Fix the hanger to the mounting location with four self-tapping screws (5x20). See the outline drawing on page D-1 for complete mounting dimensions.

2.Loosely screw the knob bolts into the display unit.

3.Set the display unit to the hanger and tighten the knob bolts.

4.Attach the hard cover to the display unit to protect the LCD.

FIXING HOLE

Unit: mm

Display unit, mounting dimensions for desktop or overhead mounting

2

Image 8

Contents Color GPS/PLOTTER/SOUNDER GP-7000F Iii00014914012 Safety Instructions System Configuration Standard supply Name Type Code No Qty RemarksOptional equipment Name Type Code No QtyDisplay Unit Mounting considerationsMounting Desktop, overhead mountingFlush mounting Antenna Unit Remarks on installation TransducerInside-hull mounting Necessary toolsAttaching the transducer Final preparationsCoating transducer face with silicone sealant Squeezing out air bubbles in adhesiveTransducer mounting location Thru-hull mount transducer mounting dimensions millimetersThru-hull mounting Acceptable transducer mounting locations Suitable transducer mounting locationsTransducer mounting Procedure for installing the thru-hull mount transducerConstruction of fairing block Installing the transom mount transducer on a flat hull Transom mount transducerInstalling the transom mount transducer on a deep-V hull Transducer preparationOptional triducer Triducer 525ST-MSDHeight required at mounting location Mounting location on single drive boatInstallation template Sensor position and transom angle Vertical adjustment and cable routing Attaching the sensor to the bracketPage Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB Speed/water temperature sensor ST-02MSB, ST-02PSBWiring Power source TransducerGround Connecting the antenna cable Antenna Code no Contents Cable setAntenna cable Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Part Type Code No Qty Remarks Optional transducerFabricating the transducer cable Adjustments Choosing Position Data SourceINPUT/OUTPUT menu Choosing Port I/O Format Nmea 1 INPUT, Nmea 1 Output menusInput Description of Nmea optionsOutput FormatInput data, sentence priority Port Format Data sentence RemarksEcho Sounder Settings Setting transducer model, output powerOutput Power Transducer Echo Sounder System Setup menuEcho Sounder menu Calibrating speed/water temperature sensor, setting draftSensor Setup menu Setting range Choosing Data SourcesEXT Nmea menu Calibrating Nmea Depth, Speed and Water Temperature DataSetting range Waypoint, Route Format External Event FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F