Furuno GP-7000F installation manual INPUT/OUTPUT menu

Page 33

3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.


	INTERNAL GPS SETUP
	NMEA 1 INPUT	NMEA-0183 4800-N81-N
	NMEA 1 OUTPUT
	NMEA 2 INPUT	NMEA-0183 4800-N81-N
	NMEA 2 OUTPUT
	RS232/NMEA 3 INPUT	NMEA-0183 4800-N81-N
	RS232C 3 OUTPUT
	INPUT 3 MODE	RS232C
	WPL/RTE FORMAT	Standard
	EXTERNAL EVENT	Off
	C-LINK	Off
	DEPTH SOURCE	Sounder
	TEMP SOURCE	NMEA
	STW SOURCE	NMEA

INPUT/OUTPUT menu

4.Rotate the [ENTER] knob to choose INTERNAL GPS SETUP and then push the [ENTER] knob.

RESTART GPS
INTERNAL GPS	On
DIFF CORR SOURCE WAAS
WAAS SEARCH	Auto

INTERNAL GPS SETUP menu

5. Rotate the [ENTER] knob to choose INTERNAL GPS and then push the [ENTER] knob.

Off

On

6.Rotate the [ENTER] knob to choose Off or On and then push the [ENTER] knob. Off: Use external navigator

On: Use internal GPS navigator

7.Press the [MENU] key to close all open windows and erase the menu bar.

27

Image 33

Contents Iii Color GPS/PLOTTER/SOUNDER GP-7000F00014914012 Safety Instructions System Configuration Name Type Code No Qty Remarks Standard supplyName Type Code No Qty Optional equipmentMounting considerations Display UnitDesktop, overhead mounting MountingFlush mounting Antenna Unit Transducer Remarks on installationInside-hull mounting Necessary toolsFinal preparations Attaching the transducerCoating transducer face with silicone sealant Squeezing out air bubbles in adhesiveThru-hull mount transducer mounting dimensions millimeters Thru-hull mountingTransducer mounting location Suitable transducer mounting locations Acceptable transducer mounting locationsProcedure for installing the thru-hull mount transducer Construction of fairing blockTransducer mounting Transom mount transducer Installing the transom mount transducer on a flat hullTransducer preparation Installing the transom mount transducer on a deep-V hullTriducer 525ST-MSD Optional triducerMounting location on single drive boat Height required at mounting locationInstallation template Sensor position and transom angle Attaching the sensor to the bracket Vertical adjustment and cable routingPage Speed/water temperature sensor ST-02MSB, ST-02PSB Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSBWiring Transducer Power sourceGround Antenna Code no Contents Cable set Connecting the antenna cableAntenna cable Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Optional transducer Fabricating the transducer cablePart Type Code No Qty Remarks Choosing Position Data Source AdjustmentsINPUT/OUTPUT menu Nmea 1 INPUT, Nmea 1 Output menus Choosing Port I/O FormatInput Description of Nmea optionsFormat OutputInput data, sentence priority Port Format Data sentence RemarksSetting transducer model, output power Echo Sounder SettingsOutput Power Transducer Echo Sounder System Setup menuCalibrating speed/water temperature sensor, setting draft Sensor Setup menuEcho Sounder menu Choosing Data Sources Setting rangeCalibrating Nmea Depth, Speed and Water Temperature Data Setting rangeEXT Nmea menu External Event Format Waypoint, Route FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F