Furuno GP-7000F installation manual Power source, Transducer

Page 26

Power source

The power source is a 12-24 VDC battery. Be sure the power cable is tightly fastened to the power source and the polarity (plus and minus) is correct. Connect the white lead to the positive terminal

(+) and the black lead to the negative terminal (-).

Transducer

Connect the transducer to XDR port on the rear of the display unit. If the optional speed/water tem- perature sensor is connected, connect the transducer with the optional cable 02S4147 (Code No. 000-141-082).

Connect to XDR port on display unit

MJ-A10SPF

Connection Cable

Type: 02S4147

Code No.: 000-141-082

MJ-A6SRMDMJ-A10SRMD

Connect water temperature	Connect transducer.
sensor, speed/water temperature
sensor.

How to connect transducer and sensor with optional cable 02S4147

20

Image 26

Contents Color GPS/PLOTTER/SOUNDER GP-7000F Iii00014914012 Safety Instructions System Configuration Standard supply Name Type Code No Qty RemarksOptional equipment Name Type Code No QtyDisplay Unit Mounting considerationsMounting Desktop, overhead mountingFlush mounting Antenna Unit Inside-hull mounting Remarks on installationTransducer Necessary toolsCoating transducer face with silicone sealant Attaching the transducerFinal preparations Squeezing out air bubbles in adhesiveTransducer mounting location Thru-hull mount transducer mounting dimensions millimetersThru-hull mounting Acceptable transducer mounting locations Suitable transducer mounting locationsTransducer mounting Procedure for installing the thru-hull mount transducerConstruction of fairing block Installing the transom mount transducer on a flat hull Transom mount transducerInstalling the transom mount transducer on a deep-V hull Transducer preparationOptional triducer Triducer 525ST-MSDHeight required at mounting location Mounting location on single drive boatInstallation template Sensor position and transom angle Vertical adjustment and cable routing Attaching the sensor to the bracketPage Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB Speed/water temperature sensor ST-02MSB, ST-02PSBWiring Power source TransducerGround Antenna cable Connecting the antenna cableAntenna Code no Contents Cable set Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Part Type Code No Qty Remarks Optional transducerFabricating the transducer cable Adjustments Choosing Position Data SourceINPUT/OUTPUT menu Input Choosing Port I/O FormatNmea 1 INPUT, Nmea 1 Output menus Description of Nmea optionsInput data, sentence priority OutputFormat Port Format Data sentence RemarksOutput Power Transducer Echo Sounder SettingsSetting transducer model, output power Echo Sounder System Setup menuEcho Sounder menu Calibrating speed/water temperature sensor, setting draftSensor Setup menu Setting range Choosing Data SourcesEXT Nmea menu Calibrating Nmea Depth, Speed and Water Temperature DataSetting range Waypoint, Route Format External Event FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F