Furuno GP-7000F Echo Sounder Settings, Setting transducer model, output power, Sounder Setup menu

Page 36

3.3Echo Sounder Settings

Setting transducer model, output power

The GP-7000F is preset to use a 600 W transducer (520-5PSD, 525-5PWD, 520-5MSD). For a 1 kW transducer, follow the procedure below. Note that the optional Distributor MB-1000 and cable assy. 02S4089 are necessary in order to use a 1 kW transducer.

Output Power	Transducer

600 W	520-5PSD, 525-5PWD, 520-5MSD

1 kW	50B-6, 50B-6G, 200B-5, 200B-5S, 50/200-IT

1.Use the [DISP] key to choose an echo sounder display.

2.Press the [MENU] key to show the menu bar.

3.Rotate the [ENTER] knob to choose SOUNDER from the menu bar and then push the [ENTER] knob.


	AUTO MODE PRESET	FISH
	DISPLAY MODE	NORMAL
	FREQUENCY	50 KHz
	PICTURE ADVANCE	1/1
	TEMPERATURE GRAPH	On
	ZOOM MARKER	On
	A-SCOPE	Off
	SOUNDER SETUP
	SENSOR SETUP

ECHO SOUNDER SYSTEM SETUP menu

4. Rotate the [ENTER] knob to choose SOUNDER SETUP and then push the [ENTER] knob.


	TRANSMISSION	On
	TRANSMISSION POWER	High
	TRANSDUCER	600W
	50 KHz TVG	00
	200 KHz TVG	00
	50 KHz ECHO OFFSET	+000
	200 KHz ECHO OFFSET	+000
	50 KHz BOTTOM LEVEL	+000
	200 KHz BOTTOM LEVEL	+000
	SMOOTHING	SM2
	DEPTH INFORMATION	Large
	PLAYBACK SOUNDER IMAGE	Off
	ECHO SOUNDER SIMULATION	Off

SOUNDER SETUP menu

5. Rotate the [ENTER] knob to choose TRANSDUCER and then push the [ENTER] knob.

600W

1KW

6.Rotate the [ENTER] knob to choose 1KW and then push the [ENTER] knob.

7.Press the [MENU] key to close all open windows and erase the menu bar.

30

Image 36

Contents Color GPS/PLOTTER/SOUNDER GP-7000F Iii00014914012 Safety Instructions System Configuration Standard supply Name Type Code No Qty RemarksOptional equipment Name Type Code No QtyDisplay Unit Mounting considerationsMounting Desktop, overhead mountingFlush mounting Antenna Unit Remarks on installation TransducerInside-hull mounting Necessary toolsAttaching the transducer Final preparationsCoating transducer face with silicone sealant Squeezing out air bubbles in adhesiveThru-hull mount transducer mounting dimensions millimeters Thru-hull mountingTransducer mounting location Acceptable transducer mounting locations Suitable transducer mounting locationsProcedure for installing the thru-hull mount transducer Construction of fairing blockTransducer mounting Installing the transom mount transducer on a flat hull Transom mount transducerInstalling the transom mount transducer on a deep-V hull Transducer preparationOptional triducer Triducer 525ST-MSDHeight required at mounting location Mounting location on single drive boatInstallation template Sensor position and transom angle Vertical adjustment and cable routing Attaching the sensor to the bracketPage Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB Speed/water temperature sensor ST-02MSB, ST-02PSBWiring Power source TransducerGround Connecting the antenna cable Antenna Code no Contents Cable setAntenna cable Types of antenna cablesWaterproofing the connector How to attach N-P-8DFB connector for extension cable kit Optional transducer Fabricating the transducer cablePart Type Code No Qty Remarks Adjustments Choosing Position Data SourceINPUT/OUTPUT menu Choosing Port I/O Format Nmea 1 INPUT, Nmea 1 Output menusInput Description of Nmea optionsOutput FormatInput data, sentence priority Port Format Data sentence RemarksEcho Sounder Settings Setting transducer model, output powerOutput Power Transducer Echo Sounder System Setup menuCalibrating speed/water temperature sensor, setting draft Sensor Setup menuEcho Sounder menu Setting range Choosing Data SourcesCalibrating Nmea Depth, Speed and Water Temperature Data Setting rangeEXT Nmea menu Waypoint, Route Format External Event FormatPrimary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F