Kawai CN31 manual Press the Split button

Page 14

Page

14

	2	THE PIANO
	2	PLAYING
		PLAYING

3) SPLIT

The SPLIT function divides the keyboard into two sections—upper and lower—allowing each part to be played with a different sound.

Step1

Press the SPLIT button.

ON

The LED indicator for the SPLIT button will turn on.

The LED indicator for the upper SOUND SELECT button will also be turned on, while the LED indicator for the lower SOUND SELECT button will start to ﬂ ash.

When SPLIT mode is enabled, the display will show the combination of the selected sound variation numbers. The left number represents the lower sound and the right number represents the upper sound.

The default split point is set between B2 and C3. This point can be moved to any key on the keyboard.

Step2

Press and hold the SPLIT button, then press a key on the keyboard.

The pressed key will become the lowermost note for the upper section.

Split point

Lower section

Upper section

Step3

Hold down the button.

Play the keyboard.

Different sounds will be produced in the upper and lower sections.

An ensemble performance can be enjoyed by playing the chords and the melody with the right hand, while playing a bass line with the left hand.

Step4

To change the upper sound while SPLIT mode is enabled, press the desired SOUND SELECT button.

The LED indicator for the selected SOUND SELECT button will turn on.

Press the same button repeatedly to select another sound variation assigned to that button.

Image 14

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Failure to do so may result in fire If you are going to use an AC power cordConforms to the specified power voltage Doing so may cause electric shockProduct and other devices Product is handled incorrectlyFailure to do so may cause breakdown of this Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones ‘ Setting UP the Piano Press the Power Switch to turn on the powerAdjust the volume level using the Master Volume slider Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo SongsPlay the keyboard ‘ Selecting a Preset Sound„ Preset Sounds Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘ Exiting ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Entering ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button again‘ Adding Reverb EFFECTS/REVERBPress the Reverb button ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano ‘ Selecting a Song Playing with Concert MagicTo listen, press the Play Stop button ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song„ Melody Play ‘ Concert Magic Song Arrangement Types„ Easy Beat „ Skillful‘ Steady Beat Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayPress the Tempo button again to stop the metronome MetronomePress the Tempo button Press the Beat buttonPress the Beat button again to stop the metronome ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson buttonPress the PLAY/STOP button to play the selected song ‘ Adjusting the Tempo of a SongListening to and Playing a Song ‘ Exiting the Lesson FunctionPress the PLAY/STOP button to listen to the recording Recording a Song PracticePress the REC button while the Lesson button is lit ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automatically‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyErasing a Song LED indicators will display which songs have been recordedLED indicator of the selected song will start to ﬂ ash Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Channel number can be set from 1 to Midi ChannelUse the Value buttons to change the channel number Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices „ Parts Provided ‘ Assembly Instructions„ Assembly Sequence 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701