Kawai CN31 manual MULTI-TIMBRAL Mode ON/OFF

Page 45

Page

45

6) MULTI-TIMBRAL MODE ON/OFF

This function allows the CN piano to receive data on more than one MIDI channel simultaneously. In this mode, the CN piano can play different musical parts with different sounds for each part.

With multi-timbral mode enabled, an external sequencer can be used to enjoy an ensemble performance playing multiple sound types (multi-timbral) on a single CN piano.

¡Multi-Timbral On (On1 and On2)

This turns on the ﬂ exible 16 part multi-timbral capability. Individual MIDI channels can be turned on and off, and assigned any preset sound. The preset sound for each MIDI channel can be changed when the program change number for the desired sound is received from external MIDI device and instruments or a personal computer. The CN piano's normal program change numbers are assigned in On1 (Please see page 42 for a list of the program change numbers), and General MIDI program change numbers are assigned in On2.

¡Multi-Timbral Off

This turns off the multi-timbral capability. Only one MIDI channel will be active and only the sound currently selected will be heard when a MIDI signal is received.

Step1

Hold down the TOUCH and TRANSPOSE buttons and press the HARPSI & MALLETS button.

2

1

Hold down both buttons.

The display will alternate between showing ‘MLt’ (Multi) and on/off status. The default is off.

Step2

Use the VALUE buttons to toggle multi-timbral on1, on2 and off.

Multi-timbral mode

OFF

ON1

ON2

FUNCTION BUTTONS

5

When the multi-timbral mode is OFF and MIDI information is received, only the currently selected preset sound will be heard.

When the multi timbral mode is ON, the preset sound that is heard corresponds to any program change number that was received from external MIDI devices and instruments or a personal computer. This sound may be different from the preset sound that is currently selected using the SOUND SELECT buttons on the panel.

When multi-timbral mode is ON, the ON/OFF setting for each individual MIDI receive channel can also be set (See page 46).

The CN piano’s multi-timbral mode defaults to ‘OFF’ each time the power is turned on.

Image 45

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Conforms to the specified power voltage If you are going to use an AC power cordFailure to do so may result in fire Doing so may cause electric shockProduct is handled incorrectly Failure to do so may cause breakdown of thisProduct and other devices Instruction for AC power cord U.K ‘ Pedals ‘ Front Panel‘ Headphones Adjust the volume level using the Master Volume slider Press the Power Switch to turn on the power‘ Setting UP the Piano Basic Operations‘ Demo Songs Press the Concert Magic and Lesson buttons simultaneously‘ Selecting a Preset Sound „ Preset SoundsPlay the keyboard Two different sounds will be heard at the same time Step DualPress the Split button SplitLED indicator for the Split button will turn off Press the Split button to exit the split mode‘ Entering ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button againPress the Reverb button EFFECTS/REVERB‘ Adding Reverb ¡ Reverb‘ Adding Other Effects Press the Effects buttonSelecting the Touch Sensitivity Transposing the Piano To listen, press the Play Stop button Playing with Concert Magic‘ Selecting a Song ‘ Listening to the Song‘ Performing a Song ‘ Concert Magic Part Volume Balance„ Easy Beat ‘ Concert Magic Song Arrangement Types„ Melody Play „ SkillfulStart by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo ModesTempo value will be shown in the display ‘ Concert Magic Playback SpeedPress the Tempo button MetronomePress the Tempo button again to stop the metronome Press the Beat buttonVolume level of the metronome can also be adjusted ‘ Adjusting the Metronome VolumePress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneouslyPress the Lesson button Selecting a BOOK/SONGListening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionPress the REC button while the Lesson button is lit Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingIf no Part is selected PART1 will be selected automatically Recording REC ButtonStart to play the piano Press the PLAY/STOP button to stop recording‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongLED indicator of the selected song will start to ﬂ ash LED indicators will display which songs have been recordedErasing a Song Hold down the REC and PLAY/STOP buttons‘ Exiting a Function Mode ‘ Entering a Function ModeUse the Value buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament Use the Value buttons to change the type of temperament‘ Midi Overview Midi Channel Use the Value buttons to change the channel numberChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Use the Value buttons to toggle local control on and off Local Control ON/OFFMULTI-TIMBRAL Mode ON/OFF Use the Value buttons to toggle channel mute on and off Channel MuteUse the Value buttons to change the program change number Sending Program Change NumbersLower Octave Shift can be set from 0 to Lower Octave ShiftUse the Value buttons to toggle lower pedal on and off Lower Pedal ON/OFF‘ Connecting to Other Devices ‘ Assembly Instructions „ Assembly Sequence„ Parts Provided 7 y ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage Page OW1004E-S0701