Kawai CN31 manual Channel Mute, Use the Value buttons to toggle channel mute on and off

Page 46

Page

46

	5	BUTTONS
	5	FUNCTION
		FUNCTION

7) CHANNEL MUTE

This function determines which MIDI channels are activated to receive MIDI information when multi-timbral mode is set to ON. Each of the 16 channels can be individually activated or deactivated.

Step1

Hold down the TOUCH and TRANSPOSE buttons and press the STRINGS button.

2

1

Hold down both buttons.

The display will alternate between showing ‘P01’ (Play 01) and ‘On’, indicating that the channel 1 is activated.

When multi-timbral mode is set to OFF, the ‘channel mute’ function can not be selected.

Step2

Use the VALUE buttons to toggle channel mute on and off.

To turn the other channels on and off, use the 16 left-most white keys to select a desired channel. The display will change to indicating the selected channel. Then use the value buttons to toggle channel mute on and off.

Channel	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

Press the key

Channel1Channel16

OFFON

When changing the channel mute settings, no sound will be heard when the keys are pressed to select the individual channels.

When the multi-timbral mode is ﬁ rst turned ON after the power has been turned on, all MIDI receive channels 1-16 will be set to ‘ON’. This is the default setting.

Image 46

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Failure to do so may result in fire If you are going to use an AC power cordConforms to the specified power voltage Doing so may cause electric shockFailure to do so may cause breakdown of this Product is handled incorrectlyProduct and other devices Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones ‘ Setting UP the Piano Press the Power Switch to turn on the powerAdjust the volume level using the Master Volume slider Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo Songs„ Preset Sounds ‘ Selecting a Preset SoundPlay the keyboard Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘ Exiting ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Entering ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button again‘ Adding Reverb EFFECTS/REVERBPress the Reverb button ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano ‘ Selecting a Song Playing with Concert MagicTo listen, press the Play Stop button ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song„ Melody Play ‘ Concert Magic Song Arrangement Types„ Easy Beat „ Skillful‘ Steady Beat Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayPress the Tempo button again to stop the metronome MetronomePress the Tempo button Press the Beat buttonPress the Beat button again to stop the metronome ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson buttonPress the PLAY/STOP button to play the selected song ‘ Adjusting the Tempo of a SongListening to and Playing a Song ‘ Exiting the Lesson FunctionPress the PLAY/STOP button to listen to the recording Recording a Song PracticePress the REC button while the Lesson button is lit ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automaticallyPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyErasing a Song LED indicators will display which songs have been recordedLED indicator of the selected song will start to ﬂ ash Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Use the Value buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices „ Assembly Sequence ‘ Assembly Instructions„ Parts Provided 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701