Kawai CN31 manual Entering a Function Mode, Exiting a Function Mode

Page 36

Page

36

5. FUNCTION BUTTONS

5

FUNCTION BUTTONS

The function buttons are responsible for controlling advanced parameters within the CN31, including Tuning, Temperament, MIDI Transmit and Receive Channel, Transmit Program Change On/Off, Local On/Off, Multi- timbral Mode, Channel Mute, Program Change Number, Lower Octave Shift and Lower Pedal On/Off.

ENTERING A FUNCTION MODE

Step1

Hold down the TOUCH and TRANSPOSE buttons and press one of the SOUND SELECT or EFFECT buttons.

The functions are assigned as listed below.

Tuning

Temperament

MIDI Channel

Transmit Program Change On/Off

Local Control On/Off

Multi-Timbral Mode On/Off

Channel Mute

Program Change Number

Lower Octave Shift

Lower Pedal On/Off

1

2	Hold down both buttons.

The LED indicator of the corresponding button will start to ﬂ ash, indicating that the function is selected.

EXITING A FUNCTION MODE

Step1

Press any of the SOUND SELECT buttons or either the TOUCH or TRANSPOSE button.

The LED indicator of the button will stop ﬂ ashing and return to its normal state. When the power is turned off, settings will be reset to the factory default value.

Image 36

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions If you are going to use an AC power cord Conforms to the specified power voltageFailure to do so may result in fire Doing so may cause electric shockProduct is handled incorrectly Failure to do so may cause breakdown of thisProduct and other devices Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones Press the Power Switch to turn on the power Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo Songs‘ Selecting a Preset Sound „ Preset SoundsPlay the keyboard Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘FOUR HANDS’ Mode ‘ Entering ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button againEFFECTS/REVERB Press the Reverb button‘ Adding Reverb ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano Playing with Concert Magic To listen, press the Play Stop button‘ Selecting a Song ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song‘ Concert Magic Song Arrangement Types „ Easy Beat„ Melody Play „ SkillfulPress and hold the Concert Magic button Start by tapping any key with a constant steady beat‘ Steady Beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayMetronome Press the Tempo buttonPress the Tempo button again to stop the metronome Press the Beat button‘ Adjusting the Metronome Volume Volume level of the metronome can also be adjustedPress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson button‘ Adjusting the Tempo of a Song Listening to and Playing a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionRecording a Song Practice Press the REC button while the Lesson button is litPress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automaticallyStart to play the piano Press the PLAY/STOP button to stop recording‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyLED indicators will display which songs have been recorded LED indicator of the selected song will start to ﬂ ashErasing a Song Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Midi Channel Use the Value buttons to change the channel numberChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices ‘ Assembly Instructions „ Assembly Sequence„ Parts Provided 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701