Kawai CN31 manual Midi Exclusive Data Format, 10 F7

Page 54

Page

54

MIDI EXCLUSIVE DATA FORMAT

1st byte

1

2nd byte

3rd byte

4th byte

5th byte

6th byte

7th byte

9th byte

9th byte

10th byte

2

3

4

5

6

7

8

9

10

		1		F0	Start code
		2		40	KAWAI’s ID number
		3		00 - 0F	MIDI channel
		4		10, 30	Function code (30 when setting MULTI TIMBRE ON/OFF)
		5		04	Indicates that the instrument is Electronic Piano
		6		02	Indicates that the piano is one of ‘CA’ or ‘CN’ series
		7		data 1
		8		data 2	(See the table below.)
		9		data 3
			10 F7		End code

		data 1		data 2	data 3		Function

		00		00	----------		Multi Timbre Off

		00		01	----------		Multi Timbre On 1

		00		02	----------		Multi Timbre On 2

		0D		00-07	----------		00: Effect Off, 01: Chorus, 02: Delay 1, 03: Delay 2, 04: Delay 3,
							05: Tremolo, 06: Rotary 1, 07: Rotary 2

		0E		00-03, 06, 07	----------		00: Reverb Off, 01: Room 2, 02: Stage, 03: Hall 1, 06: Room 1,
							07: Hall 2

		14		00-7F	----------		Dual/Split balance

		16		1F-60	----------		Tune, 40: 440 Hz

		17		00, 7F	----------		00: Program Change Off, 7F: Program Change On

		18		00-05	----------		00: Light 1, 01: Normal, 02: Heavy 1, 03: Off, 04: Light 2, 05: Heavy 2

		19		00-03	----------		Lower Octave Shift

	APPENDICES	20		00-23	00-23		Dual, data 2: Right sound, data 3: Left sound
6
		25		00-08	00-0B		data 2: Temperament, data 3: Key
		21		00-23	00-23		Split, data 2: Upper sound, data 3: Lower sound

		26		00, 7F	00-0F		Multi Timbre, data 2: 00 (On), 7F (Off), data 3: channel

Image 54

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Failure to do so may result in fire If you are going to use an AC power cordConforms to the specified power voltage Doing so may cause electric shockProduct is handled incorrectly Failure to do so may cause breakdown of thisProduct and other devices Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones ‘ Setting UP the Piano Press the Power Switch to turn on the powerAdjust the volume level using the Master Volume slider Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo Songs‘ Selecting a Preset Sound „ Preset SoundsPlay the keyboard Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘ Exiting ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Entering ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button again‘ Adding Reverb EFFECTS/REVERBPress the Reverb button ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano ‘ Selecting a Song Playing with Concert MagicTo listen, press the Play Stop button ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song„ Melody Play ‘ Concert Magic Song Arrangement Types„ Easy Beat „ Skillful‘ Steady Beat Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayPress the Tempo button again to stop the metronome MetronomePress the Tempo button Press the Beat buttonPress the Beat button again to stop the metronome ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson buttonPress the PLAY/STOP button to play the selected song ‘ Adjusting the Tempo of a SongListening to and Playing a Song ‘ Exiting the Lesson FunctionPress the PLAY/STOP button to listen to the recording Recording a Song PracticePress the REC button while the Lesson button is lit ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automaticallyStart to play the piano Press the PLAY/STOP button to stop recording‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyErasing a Song LED indicators will display which songs have been recordedLED indicator of the selected song will start to ﬂ ash Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Midi Channel Use the Value buttons to change the channel numberChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices ‘ Assembly Instructions „ Assembly Sequence„ Parts Provided 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701