Kawai CN31 manual Effects/Reverb, Press the Reverb button, Adding Reverb, ¡ Reverb

Page 17

Page

17

5) EFFECTS/REVERB

When selecting some preset sounds, the LED indicator for the EFFECTS or REVERB buttons may turn on automatically. This is because certain preset sounds are prepared with an effect enabled as their default setting. Adding an effect to the sound enhances tonal quality and improves acoustic realism. This CN piano features two separate groups of effects. The ﬁrst is reverb and the second contains chorus, delay, tremolo and rotary speaker.

ADDING REVERB

¡REVERB

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. There are ﬁ ve types of reverb available: Room 1, Room 2, Stage, Hall 1 and Hall 2.

Step1

Press the REVERB button.

The LED indicator will turn on to indicate that reverb is in use. Press and hold the REVERB button to show the currently selected reverb type in the display.

Step2

To change the reverb type, use the VALUE buttons while holding down the REVERB button.

Room 1	Room 2	Stage	Hall 1

Hall 2

Hold down the button.

To turn off the reverb, press the REVERB button again.

Press the REVERB button once again to turn the reverb back on. The previously selected reverb type will be used.

Any changes made to the reverb type or on / off status will remain until the power is turned off. When the power is turned off the reverb settings will return to the default settings.

PLAYING THE PIANO

2

Image 17

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Conforms to the specified power voltage If you are going to use an AC power cordFailure to do so may result in fire Doing so may cause electric shockProduct and other devices Product is handled incorrectlyFailure to do so may cause breakdown of this Instruction for AC power cord U.K ‘ Pedals ‘ Front Panel‘ Headphones Adjust the volume level using the Master Volume slider Press the Power Switch to turn on the power‘ Setting UP the Piano Basic Operations‘ Demo Songs Press the Concert Magic and Lesson buttons simultaneouslyPlay the keyboard ‘ Selecting a Preset Sound„ Preset Sounds Two different sounds will be heard at the same time Step DualPress the Split button SplitLED indicator for the Split button will turn off Press the Split button to exit the split mode‘ Entering ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button againPress the Reverb button EFFECTS/REVERB‘ Adding Reverb ¡ Reverb‘ Adding Other Effects Press the Effects buttonSelecting the Touch Sensitivity Transposing the Piano To listen, press the Play Stop button Playing with Concert Magic‘ Selecting a Song ‘ Listening to the Song‘ Performing a Song ‘ Concert Magic Part Volume Balance„ Easy Beat ‘ Concert Magic Song Arrangement Types„ Melody Play „ SkillfulStart by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo ModesTempo value will be shown in the display ‘ Concert Magic Playback SpeedPress the Tempo button MetronomePress the Tempo button again to stop the metronome Press the Beat buttonVolume level of the metronome can also be adjusted ‘ Adjusting the Metronome VolumePress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneouslyPress the Lesson button Selecting a BOOK/SONGListening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionPress the REC button while the Lesson button is lit Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingIf no Part is selected PART1 will be selected automatically Recording REC Button‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to ﬁ nish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongLED indicator of the selected song will start to ﬂ ash LED indicators will display which songs have been recordedErasing a Song Hold down the REC and PLAY/STOP buttons‘ Exiting a Function Mode ‘ Entering a Function ModeUse the Value buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament Use the Value buttons to change the type of temperament‘ Midi Overview Channel number can be set from 1 to Midi ChannelUse the Value buttons to change the channel number Transmit Program Change ON/OFF Offon Use the Value buttons to toggle local control on and off Local Control ON/OFFMULTI-TIMBRAL Mode ON/OFF Use the Value buttons to toggle channel mute on and off Channel MuteUse the Value buttons to change the program change number Sending Program Change NumbersLower Octave Shift can be set from 0 to Lower Octave ShiftUse the Value buttons to toggle lower pedal on and off Lower Pedal ON/OFF‘ Connecting to Other Devices „ Parts Provided ‘ Assembly Instructions„ Assembly Sequence 7 y ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage Page OW1004E-S0701