Kawai CN31 manual Playing Back a Song, Playing Back Recorded Parts Separately

Page 34

Page

34

4	RECORDER

2) PLAYING BACK A SONG

The PLAY/STOP button is used to start and stop playback of the recorded song, and to also select which song and part is played.

Step1

Press the PLAY/STOP button to start playing the recorded song.

	2	1
	2	Hold down the button.
		Hold down the button.

Press the PLAY/STOP button again to stop playback.

To select a different song for playback, hold the PLAY/STOP button and press the SOUND SELECT button that corresponds to the desired song. The song will begin playback when the two buttons are released.

While the song is being played, performance information is also sent to supported devices as MIDI data (See page 40). PART1 is sent on 1ch and PART2 is sent on 2ch. When recording in DUAL mode, additional information for PART1 is sent on 9ch and additional information for PART2 is sent on 10ch.

PLAYING BACK RECORDED PARTS SEPARATELY

When selecting a song recorded with two parts, it is possible to playback PART1 and PART2 separately.

First hold the PLAY/STOP button. If LED indicators corresponding to PART1 and PART2 turn on, both parts have been recorded successfully. Releasing the PLAY/STOP button will begin playing PART1 and PART2 simultaneously.

Step1

Hold the PLAY/STOP button and press the SOUND SELECT button that corresponds to either PART1 or PART2.

21

Hold down the button.

The LED indicator will turn off accordingly, indicating that the part will not be played back. The song will begin playback when the PLAY/STOP button is released.

Image 34

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Failure to do so may result in fire If you are going to use an AC power cordConforms to the specified power voltage Doing so may cause electric shockFailure to do so may cause breakdown of this Product is handled incorrectlyProduct and other devices Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones ‘ Setting UP the Piano Press the Power Switch to turn on the powerAdjust the volume level using the Master Volume slider Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo Songs„ Preset Sounds ‘ Selecting a Preset SoundPlay the keyboard Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘ Exiting ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Entering ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button again‘ Adding Reverb EFFECTS/REVERBPress the Reverb button ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano ‘ Selecting a Song Playing with Concert MagicTo listen, press the Play Stop button ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song„ Melody Play ‘ Concert Magic Song Arrangement Types„ Easy Beat „ Skillful‘ Steady Beat Press and hold the Concert Magic buttonStart by tapping any key with a constant steady beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayPress the Tempo button again to stop the metronome MetronomePress the Tempo button Press the Beat buttonPress the Beat button again to stop the metronome ‘ Adjusting the Metronome VolumeVolume level of the metronome can also be adjusted Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson buttonPress the PLAY/STOP button to play the selected song ‘ Adjusting the Tempo of a SongListening to and Playing a Song ‘ Exiting the Lesson FunctionPress the PLAY/STOP button to listen to the recording Recording a Song PracticePress the REC button while the Lesson button is lit ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automaticallyPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyErasing a Song LED indicators will display which songs have been recordedLED indicator of the selected song will start to ﬂ ash Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Use the Value buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices „ Assembly Sequence ‘ Assembly Instructions„ Parts Provided 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701