Kawai CN31 manual Start to play the piano, Press the PLAY/STOP button to stop recording

Page 32

Page

32

4

RECORDER

 

…Step2

Start to play the piano.

The recorder will automatically start recording with the fi rst note played.

During this time, the LED indicators for the REC and PLAY/STOP buttons will be turned on. Any changes made to the sound while recording will also be recorded.

The recording can be started by pressing the PLAY/STOP button instead of pressing a key, allowing a blank bar to be inserted at the beginning of a song.

…Step3

Press the PLAY/STOP button to stop recording.

The LED indicators for the PLAY/STOP button and the REC button will turn off and the newly recorded part will be saved to memory automatically.

Saving may take a few moments and during this time the piano will not perform any other operations.

To record the piece again, simply repeat the above procedure. The new recording will completely erase the previous one.

‘RECORDING A SECOND PART

A second part can be recorded in the second track of the same song. After recording the fi rst part, select the other track and record the second part.

…Step1

Press and hold the REC button again and press the BASS button to select to record PART2.

 

2

1

Select part 2.

Hold down the REC button.

 

The LED indicators for the SONG1 button and PART2 button will start to fl ash, indicating that they are selected

for recording.

Furthermore, the LED indicator for the PART1 button will now be turned on, indicating that PART1 has already

been recorded.

Image 32
Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions If you are going to use an AC power cord Conforms to the specified power voltageFailure to do so may result in fire Doing so may cause electric shockProduct and other devices Product is handled incorrectlyFailure to do so may cause breakdown of this Instruction for AC power cord U.K ‘ Front Panel ‘ Pedals‘ Headphones Press the Power Switch to turn on the power Adjust the volume level using the Master Volume slider‘ Setting UP the Piano Basic OperationsPress the Concert Magic and Lesson buttons simultaneously ‘ Demo SongsPlay the keyboard ‘ Selecting a Preset Sound„ Preset Sounds Dual Two different sounds will be heard at the same time StepSplit Press the Split buttonPress the Split button to exit the split mode LED indicator for the Split button will turn off‘FOUR HANDS’ Mode ‘ Entering ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button againEFFECTS/REVERB Press the Reverb button‘ Adding Reverb ¡ ReverbPress the Effects button ‘ Adding Other EffectsSelecting the Touch Sensitivity Transposing the Piano Playing with Concert Magic To listen, press the Play Stop button‘ Selecting a Song ‘ Listening to the Song‘ Concert Magic Part Volume Balance ‘ Performing a Song‘ Concert Magic Song Arrangement Types „ Easy Beat„ Melody Play „ SkillfulPress and hold the Concert Magic button Start by tapping any key with a constant steady beat‘ Steady Beat ‘ Concert Magic Demo Modes‘ Concert Magic Playback Speed Tempo value will be shown in the displayMetronome Press the Tempo buttonPress the Tempo button again to stop the metronome Press the Beat button‘ Adjusting the Metronome Volume Volume level of the metronome can also be adjustedPress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneouslySelecting a BOOK/SONG Press the Lesson button‘ Adjusting the Tempo of a Song Listening to and Playing a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionRecording a Song Practice Press the REC button while the Lesson button is litPress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingRecording REC Button If no Part is selected PART1 will be selected automatically‘ Recording a Second Part Start to play the pianoPress the PLAY/STOP button to stop recording Press the PLAY/STOP button to fi nish recording Playing Back a Song ‘ Playing Back Recorded Parts SeparatelyLED indicators will display which songs have been recorded LED indicator of the selected song will start to fl ashErasing a Song Hold down the REC and PLAY/STOP buttons‘ Entering a Function Mode ‘ Exiting a Function ModeTuning Use the Value buttons to raise or lower the pitchTemperament Brief Explanation of TemperamentsUse the Value buttons to change the type of temperament ‘ KEY Signature of Temperament‘ Midi Overview Channel number can be set from 1 to Midi ChannelUse the Value buttons to change the channel number Transmit Program Change ON/OFF Offon Local Control ON/OFF Use the Value buttons to toggle local control on and offMULTI-TIMBRAL Mode ON/OFF Channel Mute Use the Value buttons to toggle channel mute on and offSending Program Change Numbers Use the Value buttons to change the program change numberLower Octave Shift Lower Octave Shift can be set from 0 toLower Pedal ON/OFF Use the Value buttons to toggle lower pedal on and off‘ Connecting to Other Devices „ Parts Provided ‘ Assembly Instructions„ Assembly Sequence 7 y ‘ Specifications ‘ Midi Exclusive Data Format 10 F7‘ Midi Implementation Chart Function Transmit Receive RemarksPage Page OW1004E-S0701